Pitting Corrosion of Mild Steel in Marine Immersion Environment—Part 2: Variability of Maximum Pit Depth
Author:
- 1 October 2004
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 60 (10) , 937-944
Abstract
A recent study has shown that in marine conditions micro-pitting in mild steel is present very early after first immersion and that macro-pitting usually does not become significant until anaerobic conditions set in. The overall pitting behavior with time was represented by a multiphase phenomenological model. This was calibrated to data from a variety of sources but with approximately consistent steel exposure area. The maximum pit depth model was shown to be a function of seawater temperature. Herein that model is developed further to deal with uncertainty in maximum pit depth information. Consistent with an earlier empirical application, it is argued that extreme value probability theory for maximum pit depth is appropriate. It is shown that when calibrated to statistical data the model evolves with time. The model presented for dealing with the uncertainty inherent in maximum pit depth represents a major departure from conventional techniques.Keywords
This publication has 16 references indexed in Scilit:
- Bacteriological influence in the development of iron sulphide species in marine immersion environmentsCorrosion Science, 2003
- Seawater Corrosivity Around The World: Results From Five Years of Testing1997
- Estimation of extremes in corrosion engineeringJournal of Applied Statistics, 1996
- Characteristics and Activities of Sulfate-Reducing Bacteria1995
- Biocorrosion: the action of sulphate-reducing bacteria1994
- Seawater Corrosivity Around the World: Results from Three Years of Testing1990
- Development of high strength low alloy steels for marine applications: Part 1: Results of long term exposure tests on commercially available and experimental steelsBritish Corrosion Journal, 1986
- Pitting and sulphide inclusions in steelCorrosion Science, 1974
- Initiation and Growth of Pits on High-Purity Iron and its Alloys with Chromium and Copper in Neutral Chloride SolutionsBritish Corrosion Journal, 1972
- Application of the Statistical Theory of Extreme Values To the Analysis of Maximum Pit Depth Data for AluminumCorrosion, 1956