Progress of plated metallization for industrial bifacial TOPCon silicon solar cells
Authors:
Open Access
- 20 December 2021
- journal article
- research article
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 30 (6) , 615-621
Abstract
Industrial tunnel oxide and passivated contact (i‐TOPCon) solar cells were metallized at Fraunhofer ISE using ultrashort pulse laser ablation of the passivation layers for the subsequent Ni/Cu/Ag plating process. The solar cells feature a tunnel SiOxand n‐type doped polysilicon layer covered by a SiNxat the rear side, whereas the front side is made of a boron emitter passivated with a AlOx/SiNxstack. The reference i‐TOPCon solar cells screen‐printed at the supplier reach an efficiency of 23.46% measured by Fraunhofer ISE CalLab. The impact of the laser process on the implied open circuit voltage (iVoc) is characterized showing minor impact on the TOPCon side, while the emitter side reveals an increasediVocloss due to laser damage. Loss analysis by simulating the plated solar cells points out the benefit of reducing the laser contact opening (LCO) area in terms of shading and contact recombination. Optimization of laser ablation and hydrofluoric acid (HF) pretreatment process result inVoc > 700 mV andFF> 82% leading to a mean efficiency 23.6% measured in‐house and a champion efficiency of 23.84% measured at Fraunhofer ISE CalLab thus outperforming the references by 0.4%abs.Keywords
Funding Information
- Bundesministerium für Wirtschaft und Energie
This publication has 20 references indexed in Scilit:
- Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cellsSolar Energy Materials and Solar Cells, 2018
- Study of screen printed metallization for polysilicon based passivating contactsEnergy Procedia, 2017
- Modulated Photoluminescence Lifetime Measurement of Bifacial Solar CellsIEEE Journal of Photovoltaics, 2017
- Interface oxides in femtosecond laser structured plated Ni-Cu-Ag contacts for silicon solar cellsSolar Energy Materials and Solar Cells, 2017
- Recombination behavior and contact resistance of n+ and p+ poly-crystalline Si/mono-crystalline Si junctionsSolar Energy Materials and Solar Cells, 2014
- Growth and Etch Rate Study of Low Temperature Anodic Silicon Dioxide Thin FilmsThe Scientific World Journal, 2014
- 21.8% Efficient n-type Solar Cells with Industrially Feasible Plated MetallizationEnergy Procedia, 2014
- Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristicsSolar Energy Materials and Solar Cells, 2014
- A Free and Fast Three-Dimensional/Two-Dimensional Solar Cell Simulator Featuring Conductive Boundary and Quasi-Neutrality ApproximationsIEEE Transactions on Electron Devices, 2012
- Theory of analyzing free energy losses in solar cellsApplied Physics Letters, 2008