Thermal and Catalytic Regeneration of Diesel Particulate Traps
Authors:
- 1 February 1983
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Thermal and catalytic techniques for regenerating particulate traps were assessed. The thermal technique used a burner which heated engine exhaust to the ignition temperature of the particulates to achieve over 90% regeneration effectiveness. HC, CO and particulate emissions resulting from combustion of particulates and burner exhaust were 25 to 50% of the allowable vehicle emissions for one CVS cycle. The fuel consumed by the burner was 9% of the fuel consumed by a vehicle over one CVS cycle. Problems with burner nozzle clogging, ignition reliability, trap durability and control system requirements were identified. In the catalytic technique, Diesel fuel containing .5 gm/gal lead and .25 gm/gal copper lowered the ignition temperature of the particulates by 425°F so that periodic regeneration occurred. The trap collected nearly all of the lead and copper resulting in limited trap life, and deposits on the engine fuel nozzles tended to increase HC emissions.Keywords
This publication has 9 references indexed in Scilit:
- Catalytic Control of Diesel ParticulateSAE International Journal of Advances and Current Practices in Mobility, 1982
- Capabilities of Diesel Electronic Fuel ControlSAE International Journal of Advances and Current Practices in Mobility, 1982
- Carbon oxidation catalyzed by leadCarbon, 1982
- Diesel Particulate Trap Regeneration TechniquesSAE International Journal of Advances and Current Practices in Mobility, 1981
- Cellular Ceramic Diesel Particulate FilterSAE International Journal of Advances and Current Practices in Mobility, 1981
- Assessment of Diesel Particulate Control—Direct and Catalytic OxidationSAE International Journal of Advances and Current Practices in Mobility, 1981
- Light-Duty Diesel NO x -HC-Particulate Trade-Off StudiesSAE International Journal of Advances and Current Practices in Mobility, 1980
- The Oxidation of Soot Deposits from Diesel EnginesSAE International Journal of Advances and Current Practices in Mobility, 1980
- Automotive Diesel Engines-Fuel Composition vs ParticulatesSAE International Journal of Advances and Current Practices in Mobility, 1979