PICKLING OF AUSTENITIC STAINLESS STEELS (A REVIEW)
Authors:
- L.-F. LiLLL.-F. Li
- J.-P. CelisJCJ.-P. Celis
- 1 January 2003
- journal article
- review article
- Published by Taylor & Francis in Canadian Metallurgical Quarterly
- Vol. 42 (3) , 365-376
Abstract
The effect of hot and cold rolling on the pickling of austenitic stainless steels is introduced. The formation of an oxide scale and a chromium-depleted layer during annealing, the composition and structure of that oxide scale and their effects on the subsequent pickling process are reviewed. The preliminary pickling methods and the mechanism of electrochemical neutral pickling are discussed in detail. The dissolution of an oxide scale is facilitated by the oxidation of either metallic cations or oxygen anion. While chromium and manganese oxides dissolve at first, followed by the dissolution of iron oxides, silicon oxide enriches at the surface. The removal of a chromium-depleted layer is the most important step during final pickling and the dissolution of the oxide scale is inconsequential. The final pickling operation with traditional electrolytes based on HNO3 + HF is detailed and compared to the environmentally friendly electrolytes. The latter operation is more advantageous due to its environmental and economical aspects. L’effet d’un laminage à chaud ou à froid sur le décapage des aciers inoxydables est présenté. La formation d’une couche d’oxydes et d’une sous-couche appauvrie en chrome pendant détrempage, la composition et la structure de cette couche d’oxydes et leurs effets sur le décapage sont passés en revue. Les phases de pré-conditionnements électrochimiques et chimiques sont discutées ainsi que les mécanismes de décapage électrochimique en milieu neutre. La dissolution de la couche d’oxydes est accélérée par l’oxydation soit des cations métalliques soit des anions d’oxygène. Les oxydes de manganèse et de chrome sont dissous en premier lieu suivi d’une dissolution des oxydes de fer. Des oxydes de silicium enrichissent la surface. L’élimination de la sous-couche appauvrie en chrome est de loin l’étape la plus importante pendant le décapage chimique et la dissolution de la couche d’oxydes n’est pas pertinente. Le décapage chimique en milieu traditionnel HNO3 + HF et dans des solutions plus acceptables d’un point de vue écologique, sont présentés et comparés. Ce dernier procédé apparaît comme étant le plus indiqué tenant compte des aspects environnementaux et économiques.Keywords
This publication has 5 references indexed in Scilit:
- Electrolytic pickling of stainless steel studied by electrochemical polarisation and DC resistance measurements combined with surface analysisElectrochimica Acta, 2001
- Mechanism of electrolytic pickling of stainless steels in a neutral sodium sulphate solutionMaterials and Corrosion, 2000
- Oxide Scale Formation on Iron-Chromium Alloys in Elevated Temperature Air EnvironmentsCorrosion, 1981
- Potentiostatic pickling: a new technique for improving stainless steel processingJournal of Applied Electrochemistry, 1976
- Anodic pickling of stainless steels in sulphuric acidJournal of Applied Electrochemistry, 1972