Enhancing Temperature Sensitivity of the Fabry–Perot Interferometer Sensor with Optimization of the Coating Thickness of Polystyrene
Open Access
Abstract
The exploration of novel polymers for temperature sensing with high sensitivity has attracted tremendous research interest. Hence, we report a polystyrene-coated optical fiber temperature sensor with high sensitivity. To enhance the temperature sensitivity, flat, thin, smooth, and air bubble-free polystyrene was coated on the edge surface of a single-mode optical fiber, where the coating thickness was varied based on the solution concentration. Three thicknesses of the polystyrene layer were obtained as 2.0, 4.1, and 8.0 μm. The temperature sensor with 2.0 μm thick polystyrene exhibited the highest temperature sensitivity of 439.89 pm °C−1 in the temperature range of 25–100 °C. This could be attributed to the very uniform and thin coating of polystyrene, along with the reasonable coefficient of thermal expansion and thermo-optic coefficient of polystyrene. Overall, the experimental results proved the effectiveness of the proposed polystyrene-coated temperature sensor for accurate temperature measurement.Keywords
Funding Information
- Korea Electric Power Corporation (R18XA02)
- Korea Basic Science Institute (2019R1A6C1010016)
This publication has 43 references indexed in Scilit:
- A miniature fiber-optic temperature sensor based on a Fabry–Perot interferometerJournal of Optics, 2012
- Fiber Bragg grating-based fiber sensor for simultaneous measurement of refractive index and temperatureSensors and Actuators B: Chemical, 2010
- A fibre-optic humidity sensor based on a porous silica xerogel film as the sensing elementSensors and Actuators B: Chemical, 2010
- Fresnel-reflection-based fiber sensor for on-line measurement of ambient temperatureOptics Communications, 2010
- Characterization of Long-period Grating Refractive Index Sensors and Their ApplicationsSensors, 2009
- Thermo-optically tunable fiber ring laser without any mechanical moving partsOptical Engineering, 2006
- A plastic optical fibre sensor for real-time humidity monitoringMeasurement Science and Technology, 2003
- Strain and temperature sensor using a combination of polymer and silica fibre Bragg gratingsOptics Communications, 2003
- Simultaneous measurement of humidity and temperature by combining a reflective intensity-based optical fiber sensor and a fiber Bragg gratingIEEE Sensors Journal, 2002
- Optical fiber humidity sensor based on a tapered fiber coated with agarose gelSensors and Actuators B: Chemical, 2000