Quality of Low-Carbon Steel as a Distribution of Pollution and Fatigue Strength Heated in Oxygen Converter
Open Access
Abstract
The works available in the literature presenting the influence of impurities on the properties (mainly fatigue strength) of material give an answer with a high degree of probability for hard steels and large precipitations (usually above 10 µm). The impact of non-metallic impurities on the durability of high-ductility steels causes much greater problems and is much more difficult to explain. The results of the existing studies rarely take into account the diameter of the impurities in relation to the distance between the impurities. This paper presents the results of tests carried out on a low-carbon steel heated in a 100-tonne oxygen converter and deoxidized under vacuum. The fatigue strength test was carried out on cylindrical samples using rotational bending for different tempering temperatures of the steel. The quotient of the average size of the inclusions and the average distance between the inclusions were analyzed. Based on the obtained results, it was found that steel annealed in the converter and vacuum degassed has a content of both phosphorus and sulfur below 0.02% and a total volume of impurities of 0.086%. The main fraction of impurities are oxide inclusions with a diameter below 2 µm. An increase in fatigue strength was found along with an increase in the number of impurities, mainly of small diameters.Keywords
This publication has 61 references indexed in Scilit:
- Effect of material defects on crack initiation under rolling contact fatigue in a bearing ringTribology International, 2013
- Nonmetallic oxide inclusions and oxygen in the vacuum-jet refining of steelSteel in Translation, 2012
- The Effect of the Production Process and Heat Processing Parameters on the Fatigue Strength of High-Grade Medium-Carbon SteelArchives of Foundry Engineering, 2012
- Roles of microstructure in fatigue crack initiationInternational Journal of Fatigue, 2010
- On the critical inclusion size of high strength steels under ultra-high cycle fatigueMaterials Science and Engineering: A, 2006
- Effect of Nonmetallic Inclusions on the Mechanical Properties of Hydrogenated SteelsMaterials Science, 2004
- Largest-extreme-value distribution analysis of multiple inclusion types in determining steel cleanlinessMetallurgical and Materials Transactions B, 2001
- The precision of methods using the statistics of extremes for the estimation of the maximum size of inclusions in clean steelsActa Materialia, 2000
- A New Approach to Model Sulphur Refining in a Gas-stirred Ladle. A Coupled CFD and Thermodynamic Model.ISIJ International, 1998
- Quantitative evaluation of effects of non-metallic inclusions on fatigue strength of high strength steels. I: Basic fatigue mechanism and evaluation of correlation between the fatigue fracture stress and the size and location of non-metallic inclusionsInternational Journal of Fatigue, 1989