On the Prediction of Failure at a Fiber/Matrix Interface in a Composite Subjected to a Transverse Tensile Load
Author:
- 1 July 1991
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 25 (7) , 869-886
Abstract
This paper deals with the 3-D stress field of a cylindrical fiber which is embedded into a resin matrix. The composite is then subjected to a uniform tensile load so. The strain energy release rate is computed and the criterion is used to predict debonding initiation at the fiber/matrix interface. The analysis shows that this failure is most likely to occur at the free surface, i.e. the region where the fiber intersects a free surface, for example a hole, an edge, or a crack. Moreover, it will occur at approximately (1/10) the load value required for the same failure to commence at the center of the fiber length. The results are also extended to include a doubly periodic array of fibers which are embedded into a matrix. Based on 3-D considerations, the stiffness matrix is shown to increase as the volume fraction of the fibers increases. Similarly, the stress sr, in the matrix is shown to decrease as the volume fraction of the fibers increases.Keywords
This publication has 12 references indexed in Scilit:
- On the three-dimensional stress field around a circular hole in a plate of arbitrary thicknessComputational Mechanics, 1990
- The three-dimensional stress field around a cylindrical inclusion in a plate of arbitrary thicknessInternational Journal of Fracture, 1989
- On the stress singularities at the intersection of a cylindrical inclusion with the free surface of a plateInternational Journal of Fracture, 1989
- The 3D stress field at the intersection of a hole and a free surfaceInternational Journal of Fracture, 1987
- A crack along the interface of a circular inclusion embedded in an infinite solidJournal of the Mechanics and Physics of Solids, 1974
- Separation of a smooth circular inclusion from a matrixInternational Journal of Engineering Science, 1973
- Transverse Normal Loading of a Unidirectional CompositeJournal of Composite Materials, 1967
- A Crack Between Dissimilar MediaJournal of Applied Mechanics, 1965
- A finite line crack in a pressurized spherical shellInternational Journal of Fracture, 1965
- Stress Singularities Resulting From Various Boundary Conditions in Angular Corners of Plates in ExtensionJournal of Applied Mechanics, 1952