Sim-to-Real Transfer Learning for Real-Time Melt Pool Geometry Prediction in Directed Energy Deposition
Preprint
- 12 June 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
In Directed Energy Deposition (DED), melt pool geometry governs part quality, but its depth lies below the surface and cannot be measured directly in real time, a long-standing barrier to closed-loop control. This paper presents a Sim-to-Real transfer learning framework that predicts melt pool width and depth in real time from infrared (IR) imagery and process parameters, bridging physics-based thermal simulation with a small set of experimental data. A multi-input hybrid CNN is pretrained on a large, simulated corpus of surface temperature maps paired with laser power, scan speed, and spot size, then fine-tuned, with all layers unfrozen, on a limited set of labeled IR frames from single-track builds. Against a baseline trained on experiments alone, the fine-tuned model is more accurate and converges faster and more stably, with the clearest gains for depth in the low-data regime (for small training sets it reaches R² > 0.7 where the baseline stays below 0.2). On six previously unseen single-track builds, frame-by-frame real-time prediction yields a mean absolute percentage error (MAPE) of 7.41% for width and 22.45% for depth, versus 29.35% and 74.66% for the baseline. An input ablation confirms that pairing thermal imagery with process parameters gives the best accuracy. Together these results show the approach is practical for sensor-driven monitoring and points toward closed-loop control in metal additive manufacturing.Keywords
This publication has 21 references indexed in Scilit:
- Prediction of 3D temperature field through single 2D temperature data based on transfer learning-based PINN model in laser-based directed energy depositionJournal of Manufacturing Processes, 2025
- Deep learning for melt pool depth contour prediction from surface thermal images via vision transformersAdditive Manufacturing Letters, 2024
- Prediction of melt pool geometry by fusing experimental and simulation dataInternational Journal of Mechanical Sciences, 2023
- Review of transfer learning in modeling additive manufacturing processesAdditive Manufacturing, 2022
- Melt pool temperature measurement and monitoring during laser powder bed fusion based additive manufacturing via single-camera two-wavelength imaging pyrometry (STWIP)Journal of Manufacturing Processes, 2022
- Numerical investigation on heat transfer of melt pool and clad generation in directed energy deposition of stainless steelInternational Journal of Thermal Sciences, 2021
- Machine learning for metal additive manufacturing: predicting temperature and melt pool fluid dynamics using physics-informed neural networksComputational Mechanics, 2021
- Prediction of melt pool temperature in directed energy deposition using machine learningAdditive Manufacturing, 2021
- Temperature profile and melt depth in laser powder bed fusion of Ti-6Al-4V titanium alloyProgress in Additive Manufacturing, 2017
- An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and controlAdditive Manufacturing, 2015