Effects of Exchanged Cation on the Microporosity of Montmorillonite
Authors:
- David W. RutherfordDRDavid W. Rutherford
- Cary T. ChiouCCCary T. Chiou
- Dennis D. EberlDEDennis D. Eberl
- 1 August 1997
- journal article
- Published by Cambridge University Press (CUP) in Clays and Clay Minerals
- Vol. 45 (4) , 534-543
Abstract
The micropore volumes of 2 montmorillonites (SAz-1 and SWy-1), each exchanged with Ca, Na, K, Cs and tetramethylammonium (TMA) ions, were calculated from the measured vapor adsorption data of N2 and neo-hexane by use of t- and αs-plots. The corresponding surface areas of the exchanged clays were determined from Brunauer-Emmett-Teller (BET) plots of N2 adsorption data. Micropore volumes and surface areas of the samples increased with the size of exchanged cation: TMA > Cs > K > Ca > Na. The SAz-1 exchanged clays showed generally greater micropore volumes and surface areas than the corresponding SWy-1 clays. The vapor adsorption data and d(001) measurements for dry clay samples were used together to evaluate the likely locations and accessibility of clay micropores, especially the relative accessibility of their interlayer spacing. For both source clays exchanged with Na, Ca and K ions, the interlayer spacing appeared to be too small to admit nonpolar gases and the accessible micropores appeared to have dimensions greater than 5.0 Å, the limiting molecular dimension of neo-hexane. In these systems, there was a good consistency of micropore volumes detected by N2 and neo-hexane. When the clays were intercalated with relatively large cations (TMA and possibly Cs), the large layer expansion created additional microporosity, which was more readily accessible to small N2 than to relatively large neo-hexane. Hence, the micropore volume as detected by N2 was greater than that detected by neo-hexane. The micropore volumes with pore dimensions greater than 5 Å determined for clays exchanged with Na, Ca and K likely resulted from the pores on particle edges and void created by overlap regions of layers. The increase in micropore volumes with pore dimensions less than 5 Å determined for clays exchanged with TMA and possibly Cs could be caused by opening of the interlayer region by the intercalation of these large cations.Keywords
This publication has 13 references indexed in Scilit:
- A New Approach to the Determination of the External Surface and Micropore Volume of Zeolites from the Nitrogen Adsorption Isotherm at 77 KThe Journal of Physical Chemistry, 1995
- Sorption of nitrogen and ethylene glycol monoethyl ether (EGME) vapors on some soils, clays, and mineral oxides and determination of sample surface areas by use of sorption dataEnvironmental Science & Technology, 1993
- Self-diffusion of alkylammonium ions in montmorilloniteJournal of Colloid and Interface Science, 1971
- Surface Area of Homoionic Illite and Montmorillonite Clay Minerals as Measured by the Sorption of Nitrogen and Carbon DioxideClays and Clay Minerals, 1970
- Surface Area of Montmorillonite from the Dynamic Sorption of Nitrogen and Carbon DioxideClays and Clay Minerals, 1968
- THE MICROPORE SIZE DISTRIBUTIONS OF CLAY MINERAL SYSTEMSEuropean Journal of Soil Science, 1967
- Thet-curve of multimolecular N2-adsorptionJournal of Colloid and Interface Science, 1966
- NITROGEN ADSORPTION EXPERIMENTS ON SEVERAL CLAY MINERALSSoil Science, 1955
- Adsorption of Water Vapor by Montmorillonite. I. Heat of Desorption and Application of BET Theory1Journal of the American Chemical Society, 1952
- Adsorption of Gases in Multimolecular LayersJournal of the American Chemical Society, 1938