Investigations on Guided Ultrasonic Wave Dispersion Behavior in Fiber Metal Laminates Using Finite Element Eigenvalue Analysis
Authors:
Open Access
- 31 May 2023
- journal article
- research article
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 23 (1)
Abstract
Composite materials such as fiber metal laminates combine the advantages of metallic materials and fiber‐reinforced polymers. Hence, these materials are of great interest for thin‐walled structures in lightweight engineering. Due to the structure of these materials, damage to fiber metal laminate components occur more frequently inside the structure than with conventional materials. Since the detection of interlaminar damage is more complicated compared to external damage, it is one of the biggest challenges in the use of fiber metal laminates. One approach to detect this kinds of damage, is the use of guided ultrasonic waves, for example Lamb waves. To be able to perform such damage detection, knowledge about the propagation behavior of this kind of waves in fiber metal laminates is fundamental. Abrupt stiffness variations across the thickness of fiber metal laminates, resulting from the different material layers, lead to the question whether the known approaches for the propagation of guided ultrasonic waves in isotropic and transversely isotropic materials are applicable here. Therefore, the objective of this work is to investigate the propagation behavior of these guided ultrasonic waves in fiber‐metal laminates over large frequency ranges. For this purpose, dispersion relations from finite element simulations are compared with experimental data and numerical solutions based on the analytical framework. The investigations are carried out using a fiber metal laminate consisting of steel and carbon fiber‐reinforced polymers. Due to the orthotropy of the laminate, wave propagation in the fiber direction and perpendicular to it is considered. For the finite element simulations a linear two dimensional eigenvalue analysis is used. This method is especially suitable because it offers a very efficient modeling approach for this kind of application. The experimental data are based on measurements contained in previous publications by the authors. The comparison of the finite element simulations with the experimental data and the data from the analytical framework show that they are in good agreement. The results shown in this work serve to validate the numerical approach presented and allow for further, more complex simulations.Keywords
This publication has 25 references indexed in Scilit:
- Derivation and experimental validation of Lamb wave equations for an n-layered anisotropic composite laminateComposite Structures, 2014
- Low velocity impact response of fibre-metal laminates – A reviewComposite Structures, 2014
- Damage evolution in GLARE fibre-metal laminate under repeated low-velocity impact testsOpen Engineering, 2012
- A review: Fibre metal laminates, background, bonding types and applied test methodsMaterials & Design (1980-2015), 2011
- Shear horizontal guided wave modes to infer the shear stiffness of adhesive bond layersThe Journal of the Acoustical Society of America, 2010
- Hybrid CFRP/titanium bolted joints: Performance assessment and application to a spacecraft payload adaptorComposites Science and Technology, 2010
- PIEZOELECTRIC WAFER ACTIVE SENSORS2008
- Numerical simulation of Lamb wave scattering in semi‐infinite platesInternational Journal for Numerical Methods in Engineering, 2001
- A two-dimensional Fourier transform method for the measurement of propagating multimode signalsThe Journal of the Acoustical Society of America, 1991
- On waves in an elastic plateProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1917