Characterization of Thermoplastic Starch Plasticized with Ternary Urea-Polyols Deep Eutectic Solvent with Two Selected Fillers: Microcrystalline Cellulose and Montmorillonite
Open Access
Abstract
The aim of the study was to prepare and characterize composite materials based on thermoplastic starch (TPS)/deep eutectic solvent (DES). Potato starch was plasticized with ternary DES: urea:glycerol:sorbitol and modified with the selected fillers: microcrystalline cellulose and sodium montmorillonite. Films were prepared via twin-screw extrusion and thermocompression of the extrudates. Then, the physicochemical properties of the TPS films were examined. The ternary DES effectively plasticized the polysaccharide leading to a highly amorphous structure of the TPS (confirmed via mechanical tests, DMTA and XRD analyses). An investigation of the behavior in water (swelling and dissolution degree) and water vapor transmission rate of the films was determined. The introduction of the two types of fillers resulted in higher tensile strength and better barrier properties of the composite TPS films. However, montmorillonite addition exhibited a higher impact than microcrystalline cellulose. Moreover, a cone calorimetry analysis of the TPS materials revealed that they showed better fire-retardant properties than TPS plasticized with a conventional plasticizer (glycerol).Keywords
Funding Information
- National Centre for Research and Development (TANGO-V-A/0047/2021-00, 2015/17/D/ST8/01290)
- National Science Centre, Poland (TANGO-V-A/0047/2021-00, 2015/17/D/ST8/01290)
This publication has 48 references indexed in Scilit:
- Combination effect of nanoparticles with flame retardants on the flammability of nanocompositesPolymer Degradation and Stability, 2011
- Phosphorus-based Flame Retardancy Mechanisms—Old Hat or a Starting Point for Future Development?Materials, 2010
- Impact of Pre‐Processing of Montmorillonite on the Properties of Melt‐Extruded Thermoplastic Starch/ Montmorillonite NanocompositesStarch - Stärke, 2009
- Production of Thermoplastic Starch/MMT‐Sorbitol Nanocomposites by Dual‐Melt Extrusion ProcessingMacromolecular Materials and Engineering, 2007
- Development of fire‐retarded materials—Interpretation of cone calorimeter dataFire and Materials, 2007
- High mechanical performance MMT-urea and formamide-plasticized thermoplastic cornstarch biodegradable nanocompositesCarbohydrate Polymers, 2006
- Structure and properties of thermoplastic corn starch/montmorillonite biodegradable compositesJournal of Applied Polymer Science, 2005
- The Effects of Citric Acid on the Properties of Thermoplastic Starch Plasticized by GlycerolStarch - Stärke, 2005
- Solid state NMR characterization and flammability of styrene–acrylonitrile copolymer montmorillonite nanocompositePolymer, 2004
- The plastcizers containing amide groups for thermoplastic starchCarbohydrate Polymers, 2004