Effects of fibres and rice husk ash on properties of heated HSC
- 1 May 2012
- journal article
- research article
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 64 (5) , 457-470
Abstract
This paper describes experimental research to study the influence of rice husk ash and polypropylene fibres of different lengths (6 and 24 mm) on the residual fracture mechanical behaviour of high-strength concrete (HSC). The evolution of residual mechanical properties with temperature (room temperature, 100°, 300°, 500° and 700°C) was analysed in various HSCs and compared with a non-reinforced reference concrete. The evolution of pore level with temperature was also studied and subsequently compared with the effect of adding fibres to HSC on preventing spalling at high temperatures. Concrete ductility was analysed through the residual characteristic length of concrete, as the characteristic length of HSC increases with high temperatures. Further study of the rice husk ash and other materials used in this study did not reveal any environmental problems.Keywords
This publication has 29 references indexed in Scilit:
- Shape and size effects on the compressive strength of high-strength concreteCement and Concrete Research, 2008
- Material performance lessonsCement and Concrete Research, 2008
- Effect of Various Moisture Contents, Variety and Dosage of Fibers on Explosive Spalling and Residual Compressive Strength of High Performance Concrete Subjected to High TemperaturesKey Engineering Materials, 2006
- The use of thermal analysis in assessing the effect of temperature on a cement pasteCement and Concrete Research, 2005
- Crack growth resistance of hybrid fiber reinforced cement compositesCement and Concrete Composites, 2003
- High-temperature behaviour of HPC with polypropylene fibresCement and Concrete Research, 2001
- Residual strength and pore structure of high-strength concrete and normal strength concrete after exposure to high temperaturesCement and Concrete Composites, 1999
- Measurement of the fracture energy using three-point bend tests: Part 3—influence of cutting theP-δ tailMaterials and Structures, 1992
- Measurement of the fracture energy using three-point bend tests: Part 1—Influence of experimental proceduresMaterials and Structures, 1992
- Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elementsCement and Concrete Research, 1976