Abstract
Purpose. The purpose of the study is to establish a quantitative relationship between the span length of existing reinforced concrete bridge girders (typical beams of type 56, designed for N-30 load) and the relative efficiency of reinforcement with external prestressed reinforcement. The ultimate goal is to ensure safe operation under modern load classes AK-15/NK-100. Methodology. An analysis of the lining stress-strain state for typical beams type 56 span lengths: 11.36 m, 16.76 m and 22.16 m. Beam models were built based on real geometric dimensions using professional calculation software LIRA SAPR. This approach made it possible to simulate the spatial behavior of the structure and to account for the actual boundary conditions and applied loads. Calculations were performed for beams with different span lengths. To ensure the load-bearing capacity of the standard beam type commonly used in existing highway bridges in Ukraine under modern traffic loads, the required additional area of reinforcement was determined using the corresponding design formula. Findings. The numerical analysis confirmed that the application of external pre-stressed reinforcement ensures the necessary bearing capacity for all span structures. It was established that although the absolute increase in bearing capacity significantly grows with the increase in span length, the relative efficiency of strengthening substantially decreases simultaneously: the rate of increase in the reinforcement effect slows down on longer beams. Originality. The originality of the study consists of the obtained results of numerical analysis that established and quantified the functional dependence between span length and the relative efficiency of External Pre-Stressed Reinforcement, and introduced the novel criteria for structural diagnosis. Practical value. The study provides a scientifically verified engineering algorithm for the mass modernization of typical bridge beams, ensuring a cost-effective path to restoring safety, durability, and compliance with the AK-15 load standard.