Influence of annealing temperature on structural, electrical, and optical properties of 80 nm thick indium-doped tin oxide on borofloat glass
Open Access
- 29 September 2022
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 33 (30) , 23293-23305
Abstract
The influences of annealing temperature (473–573 K) on the crystal structure, linear/nonlinear optical parameters, and electrical characteristics of 80 nm thick indium-doped tin oxide (ITO) thin films are investigated. Thermal annealing induces the crystal structure in the ITO. As-prepared and annealed ITO have various morphologies depending on the annealing temperature, such as nanoplates and dendritic and spherical nanoparticles. As the substrate temperature increased up to 370 K, the electrical resistivity and sheet resistance of as-prepared ITO decreased dramatically and then slightly decreased as the substrate temperature further increased. The electrical conductivity and activation energy for the various processes were estimated. The reflectance (R) and transmittance (T) data are used to calculate the linear/nonlinear optical constants and parameters. The optical bandgap increased from 3.18 to 3.8 eV as the annealing temperature increased from room temperature to 573 K. Crystallinity is improved due to the annealing and hence an enhancement in the optical energy bandgap is achieved. Meanwhile, high-temperature annealing reversibly affected the optical bandgap energy of ITO thin films via reduction and oxidation reactions. Thermal annealing of ITO films improves crystal structure, visual transparency, and electrical conductivity, making it the preferred material for optoelectronic devices and solar cells.Keywords
Funding Information
- Assiut University
This publication has 53 references indexed in Scilit:
- Characterization of indium tin oxide (ITO) thin films prepared by a sol–gel spin coating processCeramics International, 2011
- Study of Indium Tin Oxide Thin Films Deposited on Acrylics Substrates by Ion Beam Assisted Deposition TechniqueJournal of Nanoscience and Nanotechnology, 2009
- Doped and undoped ITO nanowiresChemical Physics Letters, 2005
- Optical properties of indium tin oxide and fluorine-doped tin oxide surfaces: correlation of reflectivity, skin depth, and plasmon frequency with conductivityJournal of Alloys and Compounds, 2002
- Structural, optical and electrical properties of indium tin oxide thin films prepared by spray pyrolysisSolar Energy Materials and Solar Cells, 1999
- Surface Coatings for Solar ApplicationMaterials Science Forum, 1997
- Influence of annealing on the optical properties of indium tin oxideThin Solid Films, 1991
- Materials developments for write-once and erasable phase-change optical recordingApplied Optics, 1988
- Refractive-Index Behavior of Amorphous Semiconductors and GlassesPhysical Review B, 1973
- Electrical and Optical Properties of Epitaxial Films of PbS, PbSe, PbTe, and SnTePhysical Review B, 1965