New dimensionally homogeneous jacobian matrix formulation by three end-effector points for optimal design of parallel manipulators
Authors:
- 11 August 2003
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics and Automation
- Vol. 19 (4) , 731-737
Abstract
Development of optimal design methods for parallel manipulators is important in obtaining an optimal architecture or pose for the best kinetostatic performance. The use of performance indexes such as the condition number of the conventional Jacobian matrix that is composed of nonhomogeneous physical units, however, may lack in physical significance. In order to avoid the unit inconsistency problem in the conventional Jacobian matrix, we present a new formulation of a dimensionally homogeneous Jacobian matrix for parallel manipulators with a planar mobile platform by using three end-effector points that are coplanar with the mobile platform joints. The condition number of the new Jacobian matrix is then used to design an optimal architecture or pose of parallel manipulators for the best dexterity. An illustrative design example with a six-degree-of-freedom Gough-Stewart platform parallel manipulator by using the proposed formulation is shown to generate the same optimal configurations as those from using the other existing dimensionally homogenous Jacobian formulation methods.Keywords
This publication has 19 references indexed in Scilit:
- Kinematic and static characterization of wrist joints and their optimal design2005
- On the design of the kinematic structure of seven-axes redundant manipulators for maximum conditioning2003
- Dexterity indices for planar and spatial robotic manipulators2002
- On the use of scaling matrices for task-specific robot designIEEE Transactions on Robotics and Automation, 1999
- Kinematic Isotropy and the Optimum Design of Parallel ManipulatorsThe International Journal of Robotics Research, 1997
- A family of stewart platforms with optimal dexterityJournal of Robotic Systems, 1993
- A Theory of Generalized Inverses Applied to RoboticsThe International Journal of Robotics Research, 1993
- A Scale-Independent and Frame-Invariant Index of Kinematic Conditioning for Serial Manipulators1991
- Hybrid Twist and Wrench Control for a Robotic ManipulatorJournal of Mechanical Design, 1988
- Dexterity Measures for the Design and Control of Kinematically Redundant ManipulatorsThe International Journal of Robotics Research, 1987