Ladle Heating Procedure and Its Influence on the MgO–C-Oxidation
- 30 October 2008
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 23 (8) , 758-763
Abstract
The efficiency of ladle heating can be substantially improved by preheating the combustion air using waste gas, oxygen enriching of the air, or changing the air ratio. These actions lead to an increase of the combustion temperature and a decrease of the waste gas volume rate. Hence the knowledge of the flow conditions in the ladle is of decisive importance for further reduction of the waste gas flow rate. The commercial CFD-code (Computational Fluid Dynamic) Fluent 6.3 was used to model the flow conditions in the ladle. The commercial thermodynamic software FactSage 5.3 was used to model the chemical processes such as combustion temperature, chemical composition of the waste gas, and in special the NO x production during natural gas combustion. For the calculation of the temperature distribution in the ladle lining, the flow model was coupled with a FDM (Finite Difference Method)-based thermal ladle model. The change of the combustion temperature and waste gas composition affects significantly the surface of the MgO–C-refractory lining. The oxidation of MgO–C containing 12 wt% carbon was investigated at various temperatures (1500 to 1600°C) in air atmosphere with and without air flow.Keywords
This publication has 4 references indexed in Scilit:
- Microstructure evaluation of MgO–C refractories with TiO2- and Al-additionsJournal of the European Ceramic Society, 2007
- Materials and Process Development of Advanced Refractories for Innovative Metal ProcessingAdvanced Engineering Materials, 2004
- CFD Analysis of Heat Loss in Steel Ladle Cycling2004
- Oxidation mechanism of MgO–C in air at various temperaturesBritish Ceramic Transactions, 2000