A CONSTITUTIVE MODEL FOR BOTH LOW AND HIGH STRAIN NONLINEARITIES IN HIGHLY FILLED ELASTOMERS AND IMPLEMENTATION WITH USER-DEFINED MATERIAL SUBROUTINES IN ABAQUS

Authors:
Publisher website
Google Scholar
Abstract
Strain energy functions (SEFs) are used to model the hyperelastic behavior of rubberlike materials. In tension, the stress–strain response of these materials often exhibits three characteristics: (i) a decreasing modulus at low strains (200%). Fitting an SEF that works in each regime is challenging when multiple or nonhomogeneous deformation modes are considered. The difficulty increases with highly filled elastomers because the small strain nonlinearity increases and finite-extensibility occurs at lower strains. One can compromise by fitting an SEF to a limited range of strain, but this is not always appropriate. For example, rubber seals in oilfield packers can exhibit low global strains but high localized strains. The Davies–De–Thomas (DDT) SEF is a good candidate for modeling such materials. Additional improvements will be shown by combining concepts from the DDT and Yeoh SEFs to construct a more versatile SEF. The SEF is implemented with user-defined material subroutines in Abaqus/Standard (UHYPER) and Abaqus/Explicit (VUMAT) for a three-dimensional general strain problem, and an approach to overcome a mathematically indeterminate stress condition in the unstrained state is derived. The complete UHYPER and VUMAT subroutines are also presented.

This publication has 25 references indexed in Scilit: