Mobile robot vision system using continuous laser scanning for industrial application
- 20 June 2016
- journal article
- research article
- Published by Emerald Publishing in Industrial Robot: the international journal of robotics research and application
- Vol. 43 (4) , 360-369
Abstract
Purpose: The purpose of this paper is the presentation and research of a novel robot vision system, which uses laser dynamic triangulation, to determine three-dimensional (3D) coordinates of an observed object. The previously used physical operation principle of discontinuous scanning method is substituted by continuous method. Thereby applications become possible that were previously limited by this discretization. Design/methodology/approach: The previously used prototype No. 2, which uses stepping motors to realize a discontinuous laser scan, was substituted by the new developed prototype No. 3, which contains servomotors, to achieve a continuous laser scan. The new prototype possesses only half the width and turns out to be significantly smaller and therefore lighter than the old one. Furthermore, no transmissions are used, which reduce the systematic error of laser positioning and increase the system reliability. Findings: By using a continuous laser scan method instead of discontinuous laser scan method, dead zones in the laser scanner field can be eliminated. Thereby, also by changing the physical operation principle, the implementation of applications is allowed, which previously was limited by the fixed step size or by the object distance under observation. By using servomotors instead of stepping motors, also a significant reduced positioning time can be accomplished maintaining the relative positioning error less than 1 per cent. Originality/value: The originality is based on the substitution of the physical operation principle of discontinuous by continuous laser scan. The previously used stepping motors discretized the laser scanner field and thereby produced dead zones, where 3D coordinates cannot be detected. These stepping motors were substituted by servomotors to revoke these disadvantages and provide a continuous laser scan, where dead zones in the field of view get eliminated and the step response of the laser scanner accelerated.Keywords
This publication has 23 references indexed in Scilit:
- Sensors for robotic perception. Part two: positional and environmental awarenessIndustrial Robot: the international journal of robotics research and application, 2015
- Tracking and following pedestrian trajectories, an approach for autonomous surveillance of critical infrastructuresIndustrial Robot: the international journal of robotics research and application, 2015
- Sensors for robotic perception. Part one: human interaction and intentionsIndustrial Robot: the international journal of robotics research and application, 2015
- Combined application of Power Spectrum Centroid and Support Vector Machines for measurement improvement in Optical Scanning SystemsSignal Processing, 2014
- Energy Center Detection in Light Scanning Sensors for Structural Health Monitoring Accuracy EnhancementIEEE Sensors Journal, 2014
- Optimization of 3D laser scanning speed by use of combined variable stepOptics and Lasers in Engineering, 2014
- Optical 3D laser measurement system for navigation of autonomous mobile robotOptics and Lasers in Engineering, 2014
- Automatic expert system for 3D terrain reconstruction based on stereo vision and histogram matchingExpert Systems with Applications, 2014
- Laser range finder model for autonomous navigation of a robot in a maize field using a particle filterComputers and Electronics in Agriculture, 2014
- Development of a low-cost active 3D triangulation laser scanner for indoor navigation of miniature mobile robotsRobotics and Autonomous Systems, 2012