Ozone applications for after‐clearing of disperse‐dyed poly(lactic acid) fibres
Authors:
- 27 September 2012
- journal article
- research article
- Published by Wiley in Coloration Technology
- Vol. 128 (6) , 479-487
Abstract
In this study, the effectiveness of the ozonation process, in neutral distilled water at room temperature, as a clearing process for disperse‐dyed poly(lactic acid) fibre fabrics is investigated. The efficiency of simultaneous decolorisation of dyebath effluent and clearing of dyed poly(lactic acid) in the cooled dyebath after completion of the poly(lactic acid) dyeing cycle is also explored. Conventional alkaline reduction clearing with sodium dithionite was chosen as a control clearing process for comparison. Wash fastness, colour difference, colour removal (in Hazen) and chemical oxygen demand values were determined and compared. Long ozone treatment times at high ozone dose resulted in unacceptable colour differences. The colour difference problem was solved by use of lower ozone dose; however, a warm soaping step had to be added to the after‐clearing sequence in order to achieve the desired fastness properties. A 33% reduction on the chemical oxygen demand load of the total process (dyeing + after‐clearing) could be achieved by ozone after‐clearing instead of using a conventional reduction clearing treatment. The addition of the warm soaping step to improve the fastness properties of the ozonated samples increased the total chemical oxygen demand of the process (dyeing + ozonation in water + warm soaping), but a 12–18% reduction on the chemical oxygen demand load of the total process was observed when compared with the conventional treatment sequence (dyeing + reduction clearing).Keywords
This publication has 23 references indexed in Scilit:
- Afterclearing of disperse dyed polyester with gaseous ozoneColoration Technology, 2012
- Clearing of dyed poly(lactic acid) fabrics under acidic and alkaline conditionsTextile Research Journal, 2011
- Evaluation of colour fastness and thermal migration in softened polylactic acid fabrics dyed with disperse dyes of differing hydrophobicityColoration Technology, 2010
- Overview of Poly(lactic acid) (PLA) fibreFibre Chemistry, 2010
- Surface Trimer Removal of Polyester Fibers by Ozone TreatmentTextile Research Journal, 2009
- Simultaneous afterclearing and decolorisation by ozonation after disperse dyeing of polyesterColoration Technology, 2007
- Afterclearing by ozonation: a novel approach for disperse dyeing of polyesterColoration Technology, 2006
- Dyeing poly(lactic acid) fibres in supercritical carbon dioxideColoration Technology, 2006
- Preferred alkaline reduction‐clearing conditions for use with dyed Ingeo poly(lactic acid) fibresColoration Technology, 2006
- Anaerobic and aerobic treatment of a simulated textile effluentJournal of Chemical Technology & Biotechnology, 1999