Drivers to seismic hazard curve slope
Open Access
- 6 September 2024
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 53 (15) , 4497-4510
Abstract
The slope of a linear approximation of a probabilistic seismic hazard curve, when it is represented in the log‐log scale, is a key parameter for seismic risk assessment based on closed‐form solutions, and other applications. On the other hand, it is observed that different hazard models can provide, at the same site, comparable ground shaking, yet appreciably different slopes for the same exceedance return period. Moreover, the slope at a given return period can increase or decrease from low‐ to high‐hazardous sites, depending on the models the probabilistic seismic hazard analysis (PSHA) is based on. In the study, the sensitivity of the slope to the main model components involved in PSHA was explored, that is: the earthquake rate, the magnitude and source‐to‐site distance distributions, and the value of the residual of ground motion models (GMM). With reference to a generic site, affected by an ideal seismic source zone, where magnitude follows the Gutenberg‐Richter (G‐R) relationship, it was found that the local slope of hazard curve increases with the following factors in descending order of importance: (i) increasing distance from the source; (ii) decreasing maximum magnitude and increasing ‐value of the G‐R model; (iii) increasing rate of earthquakes of interest; (iv) increasing residual of the GMM. These results help explain the systematic differences in hazard curve slopes found in three authoritative hazard models for Italy, and the related impact on simplified risk assessment.Keywords
This publication has 24 references indexed in Scilit:
- Some issues in the practical application of risk‐targeted ground motionsEarthquake Engineering & Structural Dynamics, 2023
- Structural probabilistic seismic risk analysis and damage prediction based on artificial neural networkStructures, 2022
- Peak‐over‐threshold: Quantifying ground motion beyond designEarthquake Engineering & Structural Dynamics, 2020
- A closed form solution for seismic risk assessment incorporating intensity boundsEngineering Structures, 2014
- Incorporating intensity bounds for assessing the seismic safety of structures: Does it matter?Earthquake Engineering & Structural Dynamics, 2013
- A comparison of intensity‐based demand distributions and the seismic demand hazard for seismic performance assessmentEarthquake Engineering & Structural Dynamics, 2013
- Derivation of new SAC/FEMA performance evaluation solutions with second‐order hazard approximationEarthquake Engineering & Structural Dynamics, 2012
- The effect of masonry infills on the seismic response of a four storey reinforced concrete frame—a probabilistic assessmentEngineering Structures, 2008
- Error estimation of closed‐form solution for annual rate of structural collapseEarthquake Engineering & Structural Dynamics, 2008
- Simplified probabilistic seismic performance assessment of plan‐asymmetric buildingsEarthquake Engineering & Structural Dynamics, 2007