Printing Nacre‐Mimetic MXene‐Based E‐Textile Devices for Sensing and Breathing‐Pattern Recognition Using Machine Learning
Open Access
- 4 July 2025
- journal article
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (52)
Abstract
Wearable sensors enable continuous monitoring of physiological parameters and detection of deviations from healthy baselines, offering significant potential for personalized health management and disease diagnosis. The COVID‐19 pandemic accelerates the adoption of smart face masks among the general population, particularly for respiratory health monitoring. In response to this need, a sustainable ink formulation for 3D direct‐write ink printing is developed by integrating MXene with waterborne polyurethane (WPU), resulting in nanocomposite interconnects that exhibit excellent mechanical strength and electrical performance. The nanocomposites are printed directly on textiles compatible for wearable sensing applications to obtain devices that exhibit low resistance (∼1.8 Ω cm −2 ), good biocompatibility (cell viability > 94%), and nacre‐mimetic microstructure with high tensile strength (∼120 MPa). The nanocomposite formulation is utilized to print textile‐integrated near field communication (NFC) coils and humidity sensors, with high sensitivity, stability, and reproducibility. By combining the time‐series data recorded by the wireless humidity sensor node with convolutional neural network‐based machine learning model, the sensor is able to distinguish between a range of respiratory patterns with an accuracy of ≈90%. This work should serve as an example for scalable manufacturing, high‐performance, and multifunctional e‐textiles suitable for wireless healthcare and other related applications.Keywords
Funding Information
- Wellcome / EPSRC Centre for Interventional and Surgical Sciences (203145Z/16/Z)
- European Research Council (EP/X023974/1)
This publication has 43 references indexed in Scilit:
- High‐Performance Ultrasensitive Flexible Piezoelectric Thin Film Sensors via a Cost‐Effective Transfer StrategyAdvanced Functional Materials, 2024
- Polymer‐Regulating MXene@Dopamine Electroactive Gel‐Inks for Textile‐Based Multi‐Protective WearablesAdvanced Functional Materials, 2024
- MXene Functionalized, Highly Breathable and Sensitive Pressure Sensors with Multi‐Layered Porous StructureAdvanced Functional Materials, 2023
- Highly Oxidation‐Resistant and Self‐Healable MXene‐Based Hydrogels for Wearable Strain SensorAdvanced Functional Materials, 2023
- 3D Printed Ti3C2Tx MXene/Cellulose Nanofiber Architectures for Solid‐State Supercapacitors: Ink Rheology, 3D Printability, and Electrochemical PerformanceAdvanced Functional Materials, 2021
- Self‐Powered Respiration Monitoring Enabled By a Triboelectric NanogeneratorAdvanced Materials, 2021
- MXene Composite and Coaxial Fibers with High Stretchability and Conductivity for Wearable Strain Sensing TextilesAdvanced Functional Materials, 2020
- MXene‐Reinforced Cellulose Nanofibril Inks for 3D‐Printed Smart Fibres and TextilesAdvanced Functional Materials, 2019
- 3D Printing of Freestanding MXene Architectures for Current‐Collector‐Free SupercapacitorsAdvanced Materials, 2019
- Direct Writing of Additive‐Free MXene‐in‐Water Ink for Electronics and Energy StorageAdvanced Materials Technologies, 2018