Electrocaloric effect of hafnium substituted barium titanate with diffused phase transition measured through both indirect and direct methods
Preprint
- 4 February 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The electrocaloric effect (ECE) of lead-free BaTiO3 based materials has drawn considerable attention for the application of the next generation refrigeration. In this work, the ECEs of hafnium substituted BaTiO3 have been measured through both the indirect and direct measurement methods, and a comparison between them has been made carefully. The investigated BaTiO3 compositions herein are BaTi1-xHfxO3 (abbreviated as BT-100xHf, x=0.05, 0.11, 0.17, and 0.23). According to the dielectric constant curves, the diffusivity of phase transition is strengthened with the increasing substitution of hafnium contents. Through the indirect method, the maximum ECEs of BT-100xHf appear in the vicinity of the Curie temperatures, which is due to the intrinsic of normal ferroelectrics. As the hafnium contents increase, the ECE curve becomes broader, and the temperature corresponding to the maximum ECE deviates from the Curie temperature to higher temperatures in the meanwhile, which is attributed to the strengthened diffusivity of phase transition caused by more substitution of hafnium contents. The ECE measured through the direct method indicates the same varying tendency as that measured indirectly. Differently, the ECEs of BT-11Hf and BT-17Hf are obviously larger than those measured indirectly. Especially, BT-11Hf indicates the ∆T=0.35 K about 75% larger than that measured indirectly. The reason for this discrepancy is that the configurational entropy of dipolar entities can’t be reflected in the indirect method, and there exists an invariant critical point (ICP) in BT-11Hf where different phase structures can transform reciprocally, inducing a negligibly large contribution to the configurational entropy. Although the ECE of BT-23Hf isn’t outstanding, but its Tspan=46 K indicates that BT-23Hf can maintain its ECE in a wide temperature range, which is beneficial for the actual application. In one word, the BT-100xHf does a good performance in ECE, which sets an example for the design of ECE materials.Keywords
This publication has 31 references indexed in Scilit:
- Electrocaloric effects of Ba1-Ca Ti0.9Zr0.1O3 through both direct and indirect measurementsCeramics International, 2023
- Dielectric properties and electrocaloric effect of yttrium-modified BaTiO3 ceramicsCeramics International, 2021
- Enhanced electrocaloric effect in the Sm and Hf co-doped BaTiO3 ceramicsCeramics International, 2021
- Electrocaloric effect and pyroelectric energy harvesting in diffuse ferroelectric Ba(Ti1-xCex)O3 ceramicsJournal of Electroceramics, 2019
- Sequence of structural transitions and electrocaloric properties in (Ba1-xCax)(Zr0.1Ti0.9)O3 ceramicsJournal of Alloys and Compounds, 2017
- Large room-temperature electrocaloric effect in lead-free BaHf Ti O3 ceramics under low electric fieldActa Materialia, 2016
- Giant Electrocaloric Response Over A Broad Temperature Range in Modified BaTiO3 CeramicsAdvanced Functional Materials, 2013
- The Electrocaloric Efficiency of Ceramic and Polymer FilmsAdvanced Materials, 2013
- Giant Electrocaloric Strength in Single‐Crystal BaTiO3Advanced Materials, 2013
- Entropy‐change measurement of electrocaloric effect of BaTiO3 single crystalPhysica Status Solidi (a), 2012