A FeCrAl-Al2O3 Composite Produced Via Laser Powder Bed Fusion of a Mixed Powder for Porous Catalyst Scaffolds
- 1 June 2024
- journal article
- research article
- Published by ASME International in Journal of Micro and Nano Science and Engineering
- Vol. 12 (2) , 1-31
Abstract
This study proposes a novel approach for synthesizing and etching bicontinuous FeCrAl-Al2O3 composites as a means for replacing FeCrAl foams as catalyst scaffolds in bio-driven alcohol reactors for jet-fuel production. Conventional FeCrAl foams suffer from poor availability and consequent high costs. New additive manufacturing techniques provide an opportunity to produce tailored foams in reasonable times and at acceptable costs. This research aimed to generate a porous FeCrAl structure by etching a bicontinuous FeCrAl-Al2O3 composite produced by laser powder bed fusion of amalgamated FeCrAl and Al2O3 powders. The composite powder for laser powder bed fusion is created by ball-milling FeCrAl and Al2O3 powders. This research focuses on achieving a bi-continuous FeCrAl-Al2O3 structure, essential for the selective removal of the ceramic phase. The influence of laser processing parameters on the microstructure was examined across a range of laser powers (60-120 W) and scan speeds (100-400 mm/s), showing that higher powers and speeds produce finer metal struts. A bi-continuous microstructure was consistently obtained, marking a key achievement. The Al2O3 removal process involved a two-step etching method using hydrochloric and phosphoric acids, tested across various etching times. The alumina phase was reduced from 36 vol% to 17 vol% (corresponding to an increase in porosity from 24 vol% to 43 vol%), showing the potential for use as a porous catalyst scaffold. This research demonstrates the potential for using additive manufacturing to produce porous FeCrAl structures capable of replacing hard-to-source FeCrAl foams.Keywords
This publication has 23 references indexed in Scilit:
- Renewable bio-jet fuel production for aviation: A reviewFuel, 2019
- Advances in thermochemical conversion of woody biomass to energy, fuels and chemicalsBiotechnology Advances, 2019
- Fabrication and Characterization of Core–Shell Density-Graded 316L Stainless Steel Porous StructureJournal of Materials Engineering and Performance, 2018
- Effect of cooling rate on residual stress and mechanical properties of laser remelted ceramic coatingJournal of the European Ceramic Society, 2018
- Achieving China's energy and climate policy targets in 2030 under multiple uncertaintiesEnergy Economics, 2018
- Denudation of metal powder layers in laser powder bed fusion processesActa Materialia, 2016
- An economic and environmental assessment model for microchannel device manufacturing: part 2 – ApplicationJournal of Cleaner Production, 2016
- Constraints to commercialization of algal fuelsJournal of Biotechnology, 2013
- Investigation of laser consolidation process for metal powder by two-color pyrometer and high-speed video cameraCIRP Annals, 2013
- Lanthanum–phosphorous modified HZSM-5 catalysts in dehydration of ethanol to ethylene: A comparative analysisCatalysis Communications, 2010