Strengthening Mechanisms of Powder Metallurgy Extruded CP Titanium Materials with Zirconium and Oxygen Solid Solution via Decomposition of ZrO2 Additives in Sintering
Authors:
- 15 December 2018
- journal article
- Published by Japan Society of Powder and Powder Metallurgy in Journal of the Japan Society of Powder and Powder Metallurgy
- Vol. 65 (12) , 746-755
Abstract
One of the representative high-strength titanium (Ti) alloys used as biomaterials is a commercial Ti-6Al-4V (Ti-64). It has, however, serious problems because Ti-64 contains vanadium, one of highly toxic elements, as the necessary additive to improve the mechanical strength. In this study, in order to develop a high-strength and biocompatible Ti alloy for application to biomaterials, powder metallurgy (PM) α-Ti material with zirconium (Zr) and oxygen (O) solid solution (Ti(Zr,O) alloy) was fabricated from the elemental mixture of CP Ti and ZrO2 powders. During solid-state sintering process, the additive ZrO2 particles were decomposed by reaction with CP Ti powder, and then Zr and O atoms were dissolved in the α-Ti crystals as substitutional and interstitial elements, respectively. These solution elements caused a remarkable increment of the lattice constant of α-Ti (hcp) crystal, and resulted in the significant improvement of tensile strength of Ti alloys. For example, Ti(Zr,O) alloy showed 0.2% yield stress of 1153 MPa when using CP Ti powder mixed with 3 wt.% ZrO2 particles, which was greatly high compared to PM CP Ti material with 0.2% YS of 463 MPa. In addition, the solid solution strengthening mechanism of this alloy was investigated in detail.Keywords
This publication has 11 references indexed in Scilit:
- Advanced mechanical properties of powder metallurgy commercially pure titanium with a high oxygen concentrationJournal of Materials Research, 2017
- Fabrication of high-strength Ti materials by in-process solid solution strengthening of oxygen via P/M methodsMaterials Science and Engineering: A, 2013
- Prediction of Mechanical Properties of Materials from First-PrinciplesTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 2012
- Microstructure and mechanical properties of a high nitrogen titanium alloyMaterials Science and Engineering: A, 2008
- From ultrasoft pseudopotentials to the projector augmented-wave methodPhysical Review B, 1999
- Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis setPhysical Review B, 1996
- A Statistical Theory of Solid Solution HardeningPhysica Status Solidi (b), 1970
- The Lattice Constants of High Purity Alpha TitaniumProceedings of the Physical Society (1958-1967), 1962
- The Deformation and Ageing of Mild Steel: III Discussion of ResultsProceedings of the Physical Society. Section B, 1951
- The transition point diagram of the zirconium‐titanium systemRecueil des Travaux Chimiques des Pays-Bas, 1939