Prediction of the Physical Properties of a Structural Member by the Impact Hammer Test
Open Access
Abstract
The frequency response function (FRF) in the frequency domain is a black box used to collect physical information and to indicate the modal characteristics of a dynamic system. Analyzing the collected FRF data through the impact hammer test, dynamic parameters, such as stiffness, mass, and the damping matrix, can be estimated. By extracting and analyzing the FRFs within certain ranges of the lowest few resonance frequencies, this study presents a nondestructive method to estimate the dynamic parameters and the material properties. Updating of the dynamic parameters and material properties is a crucial process for the subsequent design and maintenance. This study presents a method to estimate the physical properties of structural members using measured FRF data and generalized inverse. By extracting and analyzing the FRFs within certain ranges of the lowest few resonance frequencies, the dynamic parameters were predicted. It was observed in numerical experiments that the proposed method could properly estimate the elastic modulus and dynamic parameters of steel beams, although the results were affected by the extracted FRF ranges. The physical properties were close to more accurate values in taking the FRFs at more resonance frequencies, as the member was flexible. The proposed method was also extended to a nondestructive test for an estimation of the compressive strength of concrete. However, it faced difficulty due to the external noise contained in the measured data. It was found sin the nondestructive test that the proposed technique was affected by external noise, unlike a simple steel beam. The concrete strength could be predicted by taking the FRFs in a wide frequency range containing the lowest two resonance frequencies and by averaging the repeated test results.Keywords
Funding Information
- Chung-Ang University
- National Research Foundation of Korea
- Korean government (MSIT) (NRF-2020R1F1A1069328)
This publication has 30 references indexed in Scilit:
- System Identification Methods for (Operational) Modal Analysis: Review and ComparisonArchives of Computational Methods in Engineering, 2012
- Damage detection from the variation of parameter matrices estimated by incomplete FRF dataSmart Structures and Systems, 2012
- Estimation of parameter matrices based on measured dataApplied Mathematical Modelling, 2011
- Modal identification of output-only systems using frequency domain decompositionSmart Materials and Structures, 2001
- Estimation of Statistical Distributions for Modal Parameters Identified From Averaged Frequency Response Function DataJournal of Vibration and Control, 2001
- Complex mode indication function and its applications to spatial domain parameter estimationMechanical Systems and Signal Processing, 1988
- Direct update of dynamic mathematical models from modal test dataAIAA Journal, 1987
- Identification of Mass, Damping, and Stiffness Matrices of Mechanical SystemsJournal of Vibration and Acoustics, 1986
- Improvement of a Large Analytical Model Using Test DataAIAA Journal, 1983
- Optimal correction of mass and stiffness matrices using measured modesAIAA Journal, 1982