Fe3O4/BC for Methylene Blue Removal from Water: Optimization, Thermodynamic, Isotherm, and Kinetic Studies
Open Access
Abstract
In this research, a nanoscale magnetic biosorbent was synthesized by incorporating magnetic nanoparticles (Fe3O4 NPs) into a natural carbon framework derived from black cumin (BC) seeds. The prepared Fe3O4/BC was utilized as a low-cost, eco-friendly, and reusable nanobiosorbent for the removal of organic (e.g., methylene blue (MB) dye) pollutants from synthetic solutions. The results indicated that Fe3O4/BC had extensive surface oxygenous functional groups with a high affinity for MB dye capture at different concentrations such as 10–60 mg L−1. The optimization results suggested the removal of ~99% of methylene blue from its initial concentration (i.e., 10 mg L−1) using 2.0 g L−1 of Fe3O4/BC at pH = 7, temperature = 27 °C, and contact time = 120 min, with equilibrium adsorption capacity = 5.0 mg g−1 and partition coefficient = ~57.0 L g−1. The equilibrium adsorption efficacy at the highest initial concentration (i.e., 60.0 mg L−1) was found to be 29.0 mg g−1. The adsorption isotherm was well explained by the Freundlich model for MB. The renderability of this magnetic bioadsorbent by acid treatments showed a ~66% decline in removal efficiency (%) (~99% to ~33%; ~5.0 to ~1.7 mg g−1) for MB after six repetitive cycles of adsorption and desorption. The current Fe3O4/BC gives a better partition coefficient than previously reported acid-washed BC seeds and other BC-seed-based nanobioadsorbents, Hence, a synthesized Fe3O4/BC nanobiosorbent demonstrates potential for use in treating water contaminated with organic pollutants.Keywords
Funding Information
- Korean Government (Ministry of Science, ICT and Future Planning) (RS-2024-00350751)
This publication has 51 references indexed in Scilit:
- Fabrication of Magnetic Fe3O4/Polypyrrole/Carbon Black Nanocomposite for Effective Uptake of Congo Red and Methylene Blue Dye: Adsorption Investigation and MechanismJournal of Polymers and the Environment, 2022
- Ultrasonic-assisted synthesis of natural clay/Fe3O4/graphene oxide for enhance removal of Cr (VI) from aqueous mediaEnvironmental Science and Pollution Research, 2020
- Insight into adsorbate–adsorbent interactions between aromatic pharmaceutical compounds and activated carbon: equilibrium isotherms and thermodynamic analysisAdsorption, 2019
- Magnetic and structural studies of Fe3O4 nanoparticles synthesized via coprecipitation and dispersed in different surfactantsCeramics International, 2017
- Adsorption of Crystal Violet and Methylene Blue on Azolla and Fig Leaves Modified with Magnetite Iron Oxide NanoparticlesInternational Journal of Environmental Research, 2017
- Kinetics and equilibrium study for the adsorption of textile dyes on coconut shell activated carbonArabian Journal of Chemistry, 2017
- Adsorption characteristics for the removal of a toxic dye, tartrazine from aqueous solutions by a low cost agricultural by-productArabian Journal of Chemistry, 2017
- Quince seed mucilage magnetic nanocomposites as novel bioadsorbents for efficient removal of cationic dyes from aqueous solutionsCarbohydrate Polymers, 2015
- Removal of arsenic(III) and arsenic(V) on chemically modified low-cost adsorbent: batch and column operationsApplied Water Science, 2013
- Synthesis and characterization of biocompatible Fe3O4 nanoparticlesJournal of Biomedical Materials Research Part A, 2006