Prediction of Young’s Modulus for Injection Molded Long Fiber Reinforced Thermoplastics
Open Access
- 6 August 2018
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 2 (3) , 47
Abstract
In this article, the elastic properties of long-fiber injection-molded thermoplastics (LFTs) are investigated by micro-mechanical approaches including the Halpin-Tsai (HT) model and the Mori-Tanaka model based on Eshelby’s equivalent inclusion (EMT). In the modeling, the elastic properties are calculated by the fiber content, fiber length, and fiber orientation. Several closure approximations for the fourth-order fiber orientation tensor are evaluated by comparing the as-calculated elastic stiffness with that from the original experimental fourth-order tensor. An empirical model was developed to correct the fibers’ aspect ratio in the computation for the actual as-formed LFTs with fiber bundles under high fiber content. After the correction, the analytical predictions had good agreement with the experimental stiffness values from tensile tests on the LFTs. Our analysis shows that it is essential to incorporate the effect of the presence of fiber bundles to accurately predict the composite properties. This work involved the use of experimental values of fiber orientation and serves as the basis for computing part stiffness as a function of mold filling conditions. The work also explains why the modulus tends to level off with fiber concentration.Keywords
This publication has 32 references indexed in Scilit:
- Young’s modulus prediction of long fiber reinforced thermoplasticsComposites Science and Technology, 2013
- Using startup of steady shear flow in a sliding plate rheometer to determine material parameters for the purpose of predicting long fiber orientationJournal of Rheology, 2012
- LFTs for automotive applicationsReinforced Plastics, 2005
- Numerical simulation of the effects of volume fraction, aspect ratio and fibre length distribution on the elastic and thermoelastic properties of short fibre compositesComposites Science and Technology, 2002
- Stiffness predictions for unidirectional short-fiber composites: Review and evaluationComposites Science and Technology, 1999
- A parallel-supercomputing investigation of the stiffness of aligned, short-fiber-reinforced composites using the Boundary Element MethodInternational Journal for Numerical Methods in Engineering, 1997
- The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber CompositesJournal of Rheology, 1987
- The Effect of Variable Fiber Aspect Ratio on the Stiffness and Thermal Expansion Coefficients of a Short Fiber CompositeJournal of Composite Materials, 1987
- Fiber fracture in reinforced thermoplastic processingPolymer Engineering & Science, 1983
- The Laminate Analogy for 2 and 3 Dimensional Composite MaterialsJournal of Composite Materials, 1971