Low-volume-change, dendrite-free lithium metal anodes enabled by lithophilic 3D matrix with LiF-enriched surface
- 25 February 2019
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (11) , 6090-6098
Abstract
Lithium metal anodes having significantly high specific capacity and low potential are considered as the most promising candidates for high-energy-density batteries. However, severe dendrite growth and infinite volume change seriously limit their practical applications. Achieving stable lithium anodes with high areal capacity at high current density is still a challenge owing to the worse conditions. Here, we reported an ultrahigh-performance lithium metal anode enabled by a 3D CuO@Cu matrix with LiF-enriched surface (LiF@Li matrix) via the synergistic effect of the three-dimensional skeleton and the stable artificial solid-electrolyte interface. In this strategy, a LiF@Li matrix was fabricated through the infusion of molten Li into a 3D CuO@Cu matrix followed by NH4F coating. In this way, a lithium anode having high areal capacity (5 mA h cm−2) with excellent stability for 350 h at a current density of 5 mA cm−2 was demonstrated in a carbonate electrolyte without any additive. The corresponding LCO|LiF@Li full cell demonstrated high-rate performance with enhanced long-term stability (82.4% retention after 1000 cycles at 2C). The strategy may open up a new way to fabricate highly stable and dendrite-free Li metal anodes.Keywords
Funding Information
- China Postdoctoral Science Foundation (2018M631149)
- National Natural Science Foundation of China (21875181, 51602250)
This publication has 44 references indexed in Scilit:
- Improved cycling performances with high sulfur loading enabled by pre-treating lithium anodeIonics, 2015
- An ex-situ nitridation route to synthesize Li 3 N-modified Li anodes for lithium secondary batteriesJournal of Power Sources, 2015
- Ultrathin Two-Dimensional Atomic Crystals as Stable Interfacial Layer for Improvement of Lithium Metal AnodeNano Letters, 2014
- Stable lithium electrodeposition in liquid and nanoporous solid electrolytesNature Materials, 2014
- Interconnected hollow carbon nanospheres for stable lithium metal anodesNature Nanotechnology, 2014
- Lithium metal anodes for rechargeable batteriesEnergy & Environmental Science, 2013
- Li–O2 and Li–S batteries with high energy storageNature Materials, 2011
- Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyteJournal of Power Sources, 2011
- Functional Materials for Rechargeable BatteriesAdvanced Materials, 2011
- III. On the concentration at the electrodes in a solution, with special reference to the liberation of hydrogen by electrolysis of a mixture of copper sulphate and sulphuric acidJournal of Computers in Education, 1901