Functionally Graded Piezoelectric Energy Harvester: A Numerical Study
Open Access
- 19 August 2022
- journal article
- research article
- Published by MDPI AG in Electronics
- Vol. 11 (16) , 2595
Abstract
The performance of linear energy harvesters is primarily confined to a very narrow operating frequency bandwidth around its natural frequency. Even a slight deviation of the excitation frequency from the fundamental frequency of the system tremendously reduces the harvester’s performance. In order to minimize this shortcoming, the presented study considers the piezoelectric energy harvester with magnets introducing non-linearity in the system. The simple harmonic balance method is used to solve the non-linearity and for computing the voltage output and power in the frequency domain. In addition, the study also incorporates the functionally graded piezoelectric materials because of their superior properties. The distance between magnets (d0) has been varied from 0.4 mm to 10 mm along with grading index (n) in the range of 0 to ∞. Finally, voltage and power across the resistance were computed. The effective harvesting frequency range for d0 = 0.4 mm and n = 1 is observed in the range of 20 Hz to 85 Hz, while it was only between 35 Hz and 65 Hz for d0 = 10 mm, yielding a 216% increase in the frequency bandwidth. Under different case studies, the peak output power varied from 2 mW (d0 = 0.4 mm and n = ∞) to 6 mW (d0 = 10 mm and n = 0).Keywords
Funding Information
- UNITEN Bold (J510050002)
This publication has 29 references indexed in Scilit:
- Harmonic balance analysis of the bistable piezoelectric inertial generatorJournal of Sound and Vibration, 2012
- Experimental Duffing oscillator for broadband piezoelectric energy harvestingSmart Materials and Structures, 2011
- Investigations of a nonlinear energy harvester with a bistable potential wellJournal of Sound and Vibration, 2010
- An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitationsSmart Materials and Structures, 2009
- Free vibration analysis of functionally graded curved panels using a higher-order finite element formulationJournal of Sound and Vibration, 2008
- A vibration energy harvesting device with bidirectional resonance frequency tunabilitySmart Materials and Structures, 2008
- Thermo-electro-mechanical characteristics of functionally graded piezoelectric actuatorsSmart Materials and Structures, 2007
- Fabrication and high durability of functionally graded piezoelectric bending actuatorsSmart Materials and Structures, 2003
- On free vibration of a functionally graded piezoelectric rectangular plateActa Mechanica, 2002
- Finite element modeling of active control of functionally graded shells in frequency domain via piezoelectric sensors and actuatorsComputational Mechanics, 2002