Microstructure of melt-processed Bi2Sr2CaCu2Oy and reaction mechanisms during post heat treatment
Authors:
- 1 November 1992
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 7 (11) , 2948-2955
Abstract
Phase compositions and microstructures of melt processed 2212 were studied. 2212 starting powder was cooled from temperatures between 910 °C and 1100 °C in air at rates ranging from 350 K/min to 0.083 K/min. The solidification sequence was established for all cooling rates. Under all conditions the Bi-free (Sr, Ca)CuO2 (01x1) is the primary phase. The one-layer solid solution 11905 nucleates on this phase. The residual liquid solidifies to a glassy state, decomposes into the eutectic of Cu2O and Bi2Sr2.1Ca0.9Ox, or reacts with the primary phase and the 11905 forming 2212 at high, intermediate, or low cooling rates, respectively. Post solidification heat treatment at 850 °C in air leads to partial remelting. The Cu-rich liquid reacts with 11905 and 01x1 forming 2212. Subsequent solid/solid reactions lead to a high volume fraction of 2212 with almost ideal 2 : 2 : 1 : 2 stoichiometry.Keywords
This publication has 18 references indexed in Scilit:
- Effects of Annealing on the Microstructure and Phase Chemistry of Directionally Solidified Bi2Sr2CaCu2O8Journal of the American Ceramic Society, 1991
- Solid‐Solution Ranges of the n= 2 and n= 3 Superconducting Phases in Bi2(SrxCa1 −x)n+1CunOy and the Effect on TcJournal of the American Ceramic Society, 1991
- Development of high-T/sub c/ superconductor wires for magnet applicationsIEEE Transactions on Magnetics, 1991
- Casting and machining of devices of high temperature superconducting BSCCOJournal of Materials Research, 1991
- Textured Thick Films of Bi2Sr2Ca1Cu2OxJapanese Journal of Applied Physics, 1990
- Partial Melt Growth Process of Bi2Sr2Ca1Cu2Ox Textured Tapes on SilverJapanese Journal of Applied Physics, 1990
- Effects of heat treatment on the superconducting properties of Bi2Sr2CaCu2Ox fibers produced by the laser-heated pedestal growth methodMaterials Science and Engineering: B, 1990
- Influence of growth rate on the structure and composition of float zone grown Bi2Sr2CaCu2O8 superconducting fibersJournal of Crystal Growth, 1989
- Preparation of High Jc Bi-Sr-Ca-Cu-O Bulk Sample by Floating Zone MethodJapanese Journal of Applied Physics, 1989
- Formation of highly textured BiSrCaCuO superconducting thick films by a rapid melting processSolid State Communications, 1989