Power Control for Wind Turbine Driving a Doubly Fed Induction Generator using Type-2 Fuzzy Logic Controller
- 1 November 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Abstract
This paper deals with controlling the active and reactive power for Wind Energy Conversion System (WECS) based on a doubly fed induction machine (DFIM) connected to the electrical power grid. The Type -2 Fuzzy Logic Control method (T-2FLC) is proposed to control the WEC system. In order to demonstrate its tracking performances, this technique is compared with the classical PI Control method. Several tests are performed in Matlab/Simulink software to show the performance criteria of each controller for tracking the desired references of power under unfavorable changes of the parameters of the control system. Thus, the simulation results show perfectly the robustness and accuracy of the proposed control approach T-2FLC of tracking the active and reactive power. Also, the simulations illustrate the weakness of the PI classic for tracking the desired power under difficult variations of the system parameters.Keywords
This publication has 13 references indexed in Scilit:
- Notice of Violation of IEEE Publication Principles: Fuzzy logic control of DFIG-based wind turbine2018
- Dynamic modeling and control of DFIG-based wind turbines under balanced network conditionsInternational Journal of Electrical Power & Energy Systems, 2016
- Direct power control of DFIG wind turbine systems based on an intelligent proportional-integral sliding mode controlISA Transactions, 2016
- Robust fractional order sliding mode control of doubly-fed induction generator (DFIG)-based wind turbinesISA Transactions, 2016
- Sliding mode direct power control of RSC for DFIGs driven by variable speed wind turbinesAlexandria Engineering Journal, 2015
- Low voltage ride-through technique for PMSG wind turbine systems using interval type-2 fuzzy logic control2015
- Direct torque control of a doubly fed induction generator of wind turbine for maximum power extraction2014
- An assessment of exploiting renewable energy sources with concerns of policy and technologyEnergy Policy, 2010
- Simplified Modeling of a DFIG for Transient Studies in Wind Power ApplicationsIEEE Transactions on Industrial Electronics, 2010
- Advanced control of a doubly-fed induction generator for wind energy conversionElectric Power Systems Research, 2009