Microstructure related influence on the electrical properties of pulsed laser ablated (Ba, Sr)TiO3 thin films
- 15 September 2000
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 88 (6) , 3506-3513
Abstract
The microstructural dependence of electrical properties of thin films were studied from the viewpoint of dc and ac electrical properties. The films were grown using a pulsed laser deposition technique in a temperature range of 300 to 600 °C, inducing changes in grain size, structure, and morphology. Consequently, two different types of films were realized, of which type I, was polycrystalline, multigrained, while type II was [100] oriented possessing a densely packed fibrous microstructure. Leakage current measurements were done at elevated temperatures to provide evidence of the conduction mechanism present in these films. The results revealed a contribution from both electronic and ionic conduction. In the case of type I films, two trapping levels were identified with energies around 0.5 and 2.73 eV, which possibly originate from oxygen vacancies and centers, respectively. These levels act as shallow and deep traps and are reflected in the current–voltage characteristics of the BST thin films. The activation energy associated with oxygen vacancy motion in this case was obtained as 1.28 eV. On the contrary, type II films showed no evidence of deep trap energy levels, while the identified activation energy associated with shallow traps was obtained as 0.38 eV. The activation energy obtained for oxygen vacancy motion in type II films was around 1.02 eV. The dc measurement results were further elucidated through ac impedance analysis, which revealed a grain boundary dominated response in type I in comparison to type II films where grain response is highlighted. A comparison of the mean relaxation time of the two films revealed three orders of magnitude higher relaxation time in the case of type I films. Due to smaller grain size in type I films the grains were considered to be completely depleted giving rise to only grain boundary response for the bulk of the film. The activation energy obtained from conductivity plots agree very well with that of dc measurements giving values 1.3 and 1.07 eV for type I and type II films, respectively. Since oxygen vacancy transport have been identified as the origin of resistance degradation in BST thin films, type I films with their higher value of activation energy for oxygen ion mobility explains the improvement in breakdown characteristics under constant high dc field stress. The role of microstructure in controlling the rate of degradation is found useful in this instance to enhance the film properties under high electric field stresses.
Keywords
This publication has 21 references indexed in Scilit:
- Study of the electrical properties of pulsed laser ablated (Ba0.5Sr0.5)TiO3 thin filmsMaterials Science and Engineering: B, 1999
- HIGH-DIELECTRIC CONSTANT THIN FILMS FOR DYNAMIC RANDOM ACCESS MEMORIES (DRAM)Annual Review of Materials Science, 1998
- A comparative study on the electrical conduction mechanisms of (Ba0.5Sr0.5)TiO3 thin films on Pt and IrO2 electrodesJournal of Applied Physics, 1998
- Leakage currents in Ba0.7Sr0.3TiO3 thin films for ultrahigh-density dynamic random access memoriesJournal of Applied Physics, 1997
- A review of high dielectric materials for DRAM capacitorsIntegrated Ferroelectrics, 1997
- Leakage Currents in CVD (Ba,Sr)TiO3 Thin FilmsMRS Proceedings, 1996
- Excimer laser ablated barium strontium titanate thin films for dynamic random access memory applicationsApplied Physics Letters, 1993
- High Rate Thick Film GrowthAnnual Review of Materials Science, 1977
- Influence of substrate temperature and deposition rate on structure of thick sputtered Cu coatingsJournal of Vacuum Science and Technology, 1975
- Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatingsJournal of Vacuum Science and Technology, 1974