Investigation and evaluation of a 3D‐printed optical modified cultivation vessel for improved scattered light measurement of biotechnologically relevant organisms
Open Access
- 23 August 2023
- journal article
- research article
- Published by Wiley in Engineering in Life Sciences
- Vol. 23 (9) , e2300204
Abstract
In the field of bioprocess development miniaturization, parallelization and flexibility play a key role reducing costs and time. To precisely meet these requirements, additive manufacturing (3D‐printing) is an ideal technology. 3D‐printing enables rapid prototyping and cost‐effective fabrication of individually designed devices with complex geometries on demand. For successful bioprocess development, monitoring of process‐relevant parameters, such as pH, dissolved oxygen (DO), and biomass, is crucial. Online monitoring is preferred as offline sampling is time‐consuming and leads to loss of information. In this study, 3D‐printed cultivation vessels with optical prisms are evaluated for the use in upstream processes of different industrially relevant microorganisms and cell lines. It was shown, that the 3D‐printed optically modified well (OMW) is of benefit for a wide range of biotechnologically relevant microorganisms and even for mammalian suspension cells. Evaluation tests with Escherichia coli, Bacillus subtilis, Saccharomyces cerevisiae, and Chinese hamster ovary (CHO) cells were performed, providing highly reproducible results. Growth behavior of OMW cultures was comparable to behavior of shake flask (SF) cultivations and the signal to noise ratio in online biomass measurement was shown to be reduced up to 95.8% by using the OMW. Especially the cultivation phases with low turbidity respective optical densities below 1.0 rel.AU could be monitored accurately for the first time. Furthermore, it was demonstrated that the 3D‐printed optics are transferable to different well geometries and sizes, enabling efficient biomass monitoring for individual requirements with tailor‐made 3D‐printed cultivation vessels in small scale.Keywords
This publication has 31 references indexed in Scilit:
- Integration of models and experimentation to optimise the production of potential biotherapeuticsDrug Discovery Today, 2013
- Advances in shaking technologiesTrends in Biotechnology, 2012
- High-throughput process development for biopharmaceutical drug substancesTrends in Biotechnology, 2011
- Transcriptional Regulation in Yeast during Diauxic Shift and Stationary PhaseOMICS: A Journal of Integrative Biology, 2010
- A review of advanced small‐scale parallel bioreactor technology for accelerated process development: Current state and future needBiotechnology Progress, 2010
- The baffled microtiter plate: Increased oxygen transfer and improved online monitoring in small scale fermentationsBiotechnology and Bioengineering, 2009
- Improving bioreactor cultivation conditions for sensitive cell lines by dynamic membrane aerationCytotechnology, 2009
- Characterisation of operation conditions and online monitoring of physiological culture parameters in shaken 24-well microtiter platesBioprocess and Biosystems Engineering, 2005
- Bioprocess monitoringCurrent Opinion in Biotechnology, 2002
- Light Scattering and Absorption as Methods of Studying Cell Population ParametersAnnual Review of Biophysics and Bioengineering, 1982