Thermomechanical properties of radiation‐modified blends of polyethylene with liquid crystalline copolyester
Authors:
- 1 August 1999
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 39 (8) , 1375-1382
Abstract
The results of investigation of gamma irradiated blends of high‐density polyethylene (PE) with thermotropic polymer liquid crystal (PLC) are presented. The PLC used was a copolyester of 40% poly(ethylene terephthalate) with 60% p‐(hydroxy‐benzoic acid). The PLC content in the blends was 0, 5, and 10 wt%. The constituents were blended with the use of a single screw extruder. The specimens were prepared by compression molding. The irradiation of the samples was performed by a Co60 γ‐radiation source in inert atmosphere (argon) up to absorbed relatively low doses (up to 200 kGy; 1 Mrad = 10 kGy). The morphological, thermal, and mechanical properties were investigated for irradiated and unirradiated samples. The influence of gamma irradiation and addition of PLC on the temperature dependence of the elastic modulus as well as the effect of a “form memory” of the materials examined are discussed. It was found that an addition of the PLC affects substantially the stress‐strain relationship in tension at temperatures above the melting point of PE for the irradiated samples. The features of thermomechanical behavior of the PE + PLC blends, previously irradiated and oriented, at isometrical heating and cooling were also established. The results obtained testify that the addition of PLC to PE makes it possible to improve considerably the thermosetting properties of the heat‐shrinkable polymeric products.Keywords
This publication has 20 references indexed in Scilit:
- Application of the ultrasonic method for the control of thermosetting polymer materialsMechanics of Composite Materials, 1997
- Structure and properties of injection molded blends of liquid crystal polymer (40 PET/60 PHB) with poly(butylene terephthalate)Mechanics of Composite Materials, 1996
- Mechanical properties of blends of liquid crystalline copolyesters with polyprophyleneMechanics of Composite Materials, 1995
- Thermal and mechanical properties of injection molded blends of a liquid crystalline polymer and poly(butylene terephthalate)Polymer Engineering & Science, 1994
- Mechanical properties of in situ composites based on polycarbonate and a liquid crystalline polymerPolymer, 1994
- The mechanism of skin‐core morphology formation in extrudates of polycarbonate/liquid crystalline polymer blendsPolymer Engineering & Science, 1993
- Studies on compatibilization of blends of polypropylene and a thermotropic liquid crystalline polymerJournal of Applied Polymer Science, 1993
- The effect of compatibilization on blends of polypropylene with a liquid-crystalline polymerPolymer, 1993
- Physical properties of blends of polycarbonate and a liquid crystalline copolyesterPolymer Engineering & Science, 1989
- History of the Irradiation Cross-Linking of PolyethyleneJournal of Macromolecular Science: Part A - Chemistry, 1981