Influence of Substrate Temperature on Microcracks Formation in Plasma-Sprayed Yttria-Stabilized Zirconia Splats
- 7 March 2008
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 373-374, 69-72
Abstract
YSZ molten droplets created by plasma spraying were deposited on the YSZ substrate preheated to different temperature from 75oC to 1000oC. The results showed that there is little change in crack spacing when substrate temperature is less than about 740oC, and a significant increase in crack spacing from 3.54 μm at 740oC to 10.91 μm at 1000oC was observed. A simple qualitative model was proposed on the basis of the origin of thermal stresses to explain the influence of substrate initial temperature on crack density characterized by crack spacing. The analysis indicates that the results can be ascribed to the changes in tensile stress and splat/substrate adhesion resulting from changes of substrate initial temperature.Keywords
This publication has 13 references indexed in Scilit:
- Thermophysical properties and thermal cycling behavior of plasma sprayed thick thermal barrier coatingsSurface and Coatings Technology, 2005
- Atmospheric plasma sprayed thick thermal barrier coatings with high segmentation crack densitySurface and Coatings Technology, 2004
- Evaporated-gas-induced splashing model for splat formation during plasma sprayingSurface and Coatings Technology, 2004
- Microstructure-property modifications in plasma sprayed 20 wt.% yttria stabilized zirconia electrolyte by spark plasma sintering (SPS) techniqueMaterials Science and Engineering: A, 2004
- Densification of plasma sprayed YSZ electrolytes by spark plasma sintering (SPS)Journal of the European Ceramic Society, 2003
- Role of condensates and adsorbates on substrate surface on fragmentation of impinging molten droplets during thermal sprayThin Solid Films, 2001
- Development of Thermal Spraying-Sintering Technology for Solid Oxide Fuel CellsJournal of Thermal Spray Technology, 2000
- Investigation of dominating factors on flattening behavior of plasma sprayed ceramic particlesSurface and Coatings Technology, 1999
- Mechanical and thermophysical properties of thick PYSZ thermal barrier coatings: correlation with microstructure and spraying parametersSurface and Coatings Technology, 1998
- Structural properties of plasma-sprayed zirconia-based electrolytesJournal of Materials Science, 1988