Interfacial Bonding Behavior of Stainless Steel/Carbon Steel–Laminated Composites Fabricated by Liquid–Solid Bonding
Authors:
- 22 January 2023
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 25 (10)
Abstract
Liquid–solid (L–S) bonding is a promising technique for preparing laminate metal matrix composites, nevertheless, interfacial heat transfer and microstructure evolution are complicated and strongly affect the bonding behavior. Herein, stainless steel (SS)/carbon steel (CS)‐laminated composites are fabricated by L–S bonding method under different conditions. The interfacial heat‐transfer behavior and microstructure characteristics are investigated by simulations and experiments, and the bonding mechanism are analyzed. Dramatic heat transfer occurs at the cladding interface and results in a vertical temperature gradient, the substrate temperature sharply increases to the peak value and then decreases with reducing cooling rate. Metallurgical bonding cladding interfaces without oxides are obtained under a melt temperature of 1923 K and substrate‐preheating temperatures of 773 and 973 K. During the L–S bonding process, an Fe–O oxide layer covering the substrate forms and then spalls from the substrate due to cracking or decomposition due to intense heat flux during the heating stage. Subsequently, solid diffusion or dissolution diffusion initiates at the fresh surface and forms flat or waved cladding interface, and the diffusion distance of Cr is significantly improved by dissolution diffusion, resulting in strengthened cladding interface zone of the SS/CS‐laminated composite.Keywords
Funding Information
- National Natural Science Foundation of China (52004028, 51904029)
This publication has 39 references indexed in Scilit:
- Interfacial phenomena in magnesium/aluminum bi-metallic castingsMaterials Science and Engineering: A, 2014
- Microstructural evaluation of interfacial intermetallic compounds in Cu wire bonding with Al and Au padsActa Materialia, 2014
- An investigation into the explosive welding/cladding of Grade A ship steel/AISI 316L austenitic stainless steelMaterials & Design (1980-2015), 2013
- Effect of explosive characteristics on the explosive welding of stainless steel to carbon steel in cylindrical configurationMaterials & Design (1980-2015), 2013
- Microstructure and mechanical properties of Al–1Mn and Al–10Si alloy circular clad ingot prepared by direct chill castingMaterials Science and Engineering: A, 2013
- Explosive welding of stainless steel–carbon steel coaxial pipesJournal of Materials Science, 2011
- Physical Properties of Iron-Oxide Scales on Si-Containing Steels at High TemperatureMATERIALS TRANSACTIONS, 2009
- Effects of Chemical Composition and Oxidation Temperature on the Adhesion of Scale in Plain Carbon Steels.ISIJ International, 2001
- Limits to adherence of oxide scalesMaterials Science and Technology, 1990
- Solute diffusion in alpha- and gamma-ironMetallurgical Transactions, 1970