Microfabrication of a Fluoropolymer Film Using Conventional XeCl Excimer Laser by Laser-Induced Backside Wet Etching
Authors:
- Jun WangJWJun Wang
- Hiroyuki NiinoHNHiroyuki Niino
- Akira YabeAYAkira Yabe
- 1 July 1999
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 38 (7A) , L761-763
Abstract
The surface of a fluoropolymer film was fabricated with micron-sized features by laser-induced backside wet etching (LIBWE), using a nanosecond XeCl excimer laser at 308 nm. The etch rate ranged from 5 to 20 nm/pulse by laser irradiation at fluences varying from 160 to 500 mJ/cm2. The threshold fluence for etching was about 100 mJ/cm2 in the case of a tetrahydrofuran (THF) solution containing pyrene. The mechanism of LIBWE is explained by the formation of superheated liquid in a cyclic multiphotonic absorption process.Keywords
This publication has 9 references indexed in Scilit:
- One-step microfabrication of fused silica by laser ablation of an organic solutionApplied Physics A, 1999
- High aspect ratio micromachining Teflon by direct exposure to synchrotron radiationApplied Physics Letters, 1995
- Laser ablation of polymeric materials at 157 nmJournal of Applied Physics, 1995
- Structural-modification mechanism for polyimide-doped poly(tetrafluoroethylene) at subthreshold fluences using 248 nm radiationJournal of Applied Physics, 1994
- The mechanism of dopant-induced laser ablation. Possibility of cyclic multiphotonic absorption in excited statesChemical Physics Letters, 1994
- Mass spectrometric studies on laser ablation of polystyrene sensitized with anthraceneThe Journal of Physical Chemistry, 1993
- Direct photoetching of polymer films using vacuum ultraviolet radiation generated by high-order anti-Stokes Raman scatteringApplied Physics Letters, 1993
- Polymer ablation upon exposure to vacuum ultra-violet light.Journal of Photopolymer Science and Technology, 1992
- Porphyrin-sensitized laser swelling and ablation of polymer filmsApplied Physics A, 1991