Drilling Performance is a Function of Power at the Bit and Drilling Efficiency
Authors:
- 6 March 2012
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Today’s sophisticated data acquisition systems for both surface and downhole drilling data have greatly enhanced the understanding of the basic drilling mechanics and helped in the identification of major dysfunctions particularly harmful downhole vibrations. Various methods are now being used to optimize drilling practices by monitoring efficiency indicators such as mechanical specific energy (MSE) and preventing harmful vibrations by adjusting drilling parameters real time. However, focusing on the efficiency of components and the prevention of dysfunctions is only a partial solution. It is the magnitude of mechanical power delivered to the bit that defines the capacity of the system and directly affects efficiencies, operating practices and performance. This paper will show how the power at the bit and drilling efficiency vary as a function of drill string and BHA configuration, bit selection and drilling parameters. Field examples will illustrate the magnitude of parasitic losses caused by well geometry and the downhole environment. In many cases it is striking how little power is left for the drill bit which in the end dictates the potential rate of penetration and thus the cost per foot and economics of the drilling process. Particular emphasis has been put on new and intuitive ways to visually display the power at the surface and downhole. It makes it possible to quantify system limits and identify key dysfunctions in one, simple graph that can be used in both pre or post well analysis and real time. The better understanding of the entire drilling system and the functional relationship of its parts can be a strong driver for both short and long-term improvements in system design, drilling practices and bit selection which ultimately results in higher productivity and lower well construction cost.Keywords
This publication has 9 references indexed in Scilit:
- Mitigation of Torsional Stick-Slip Vibrations in Oil Well Drilling through PDC Bit Design: Putting Theories to the Test2011
- A Systematic Approach to Performance Drilling in Hard Rock Environments2011
- Testing the Combination of High Frequency Surface and Downhole Drilling Mechanics and Dynamics Data under a Variety of Drilling Conditions2011
- Maximizing Drill Rates with Real-Time Surveillance of Mechanical Specific Energy2005
- Unique ROP Predictor Using Bit-specific Coefficient of Sliding Friction and Mechanical Efficiency as a Function of Confined Compressive Strength Impacts Drilling Performance2005
- Technical Limit Specific Energy - An Index to Facilitate Drilling Performance Evaluation2005
- Real-Time Specific Energy Monitoring Reveals Drilling Inefficiency and Enhances the Understanding of When to Pull Worn PDC Bits2002
- Quantifying Common Drilling Problems With Mechanical Specific Energy and a Bit-Specific Coefficient of Sliding Friction1992
- General Considerations for Drill System Design1975