Rapid, Controllable Fabrication of Regular Complex Microarchitectures by Capillary Assembly of Micropillars and Their Application in Selectively Trapping/Releasing Microparticles

Authors:

Abstract
A simple strategy to realize new controllable 3D microstructures and a novel method to reversibly trapping and releasing microparticles are reported. This technique controls the height, shape, width, and arrangement of pillar arrays and realizes a series of special microstructures from 2‐pillar‐cell to 12 cell arrays, S‐shape, chain‐shape and triangle 3‐cell arrays by a combined top down/bottom up method: laser interference lithography and capillary force‐induced assembly. Due to the inherent features of this method, the whole time is less than 3 min and the fabricated area determined by the size of the laser beam can reach as much as 1 cm2, which shows this method is very simple, rapid, and high‐throughput. It is further demonstrated that the ‘mechanical hand’‐like 4‐cell arrays could be used to selectively trap/release microparticles with different sizes, e.g., 1.5, 2, or 3.5 μm, which are controlled by the period of the microstructures from 2.5 to 4 μm, and 6 μm. Finally, the ‘mechanical hand’‐like 4‐cell arrays are integrated into 100 μm‐width microfluidic channels prepared by ultraviolet photolithography, which shows that this technique is compatible with conventional microfabrication methods for on‐chip applications.

This publication has 46 references indexed in Scilit: