Microstructural Characteristics and Wear Behavior of Sintered Ni-Modified Ti–xTiB2 Composites
Open Access
- 19 April 2023
- journal article
- research article
- Published by Springer Nature in Journal of The Institution of Engineers (India): Series D
- Vol. 105 (1) , 385-394
Abstract
Titanium matrix composites were manufactured using pulsed plasma sintering with the addition of 5 wt.% Ni and TiB2 (x = 5, 10, 15, 20 wt.%) particles at a sintering temperature of 1000 °C, a heating rate of 100 °C/min, and a holding time (300 s) at an applied pressure of 50 MPa. The study examines the densification, phase evolution, hardness, microstructure, and wear behavior of Ti–Ni alloys with different ceramic (TiB2) contents. The results show that increasing TiB2 content decreases relative density from 99 to 97% while increasing hardness from 229 to 586 HV0.1. The addition of Ni particles resulted in laminar α-Ti with well-defined β-Ti grain boundaries. Furthermore, the microstructural studies have revealed a dual-phase beta and alpha Ti phase with uniformly dispersed TiB2 content. As a result of the interactions between β-Ti and Ni during sintering, an intermetallic (Ti2Ni) eutectoid phase was formed. The presence of Ni and TiB2 particles reduces the average coefficient of friction, wear volume, and wear rate. Therefore, the reinforced titanium matrix composites wear track surfaces exhibited a combination of abrasive and adhesive wear modes.Keywords
Funding Information
- University of Johannesburg
This publication has 39 references indexed in Scilit:
- Effect of ternary alloying elements on microstructure and superelastictity of Ti–Nb alloysMaterials Science and Engineering: A, 2013
- Densification mechanisms in spark plasma sintering: Effect of particle size and pressurePowder Technology, 2012
- Densification behavior and mechanical properties of the spark plasma sintered monolithic TiB2 ceramicsMaterials Science and Engineering: A, 2010
- Microstructures and mechanical properties of TiAl alloys consolidated by spark plasma sinteringIntermetallics, 2008
- Formation of TiB2 by volume combustion and mechanochemical processMaterials Research Bulletin, 2008
- Crater wear mechanisms of TiCN–Ni–WC cermets during dry machiningInternational Journal of Refractory Metals and Hard Materials, 2007
- Synthesis and consolidation of titanium diborideInternational Journal of Refractory Metals and Hard Materials, 2007
- Rapid synthesis of Ti alloy with B addition by spark plasma sinteringMaterials Science and Engineering: A, 2005
- Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applicationsMaterials Characterization, 2003
- Titanium alloys in total joint replacement—a materials science perspectiveBiomaterials, 1998