TiO2-ZnO rodlike nanocomposite as photoanode in DSSC yielding 7.38% PEC with N3 dye
Preprint
- 23 September 2024
- preprint
- Published by Springer Nature in Research Square
Abstract
The agglomeration of TiO2-ZnO nanocomposite is a well-established strategy to apprehend various energy photons from the solar spectrum. This research article focuses on direct chemical precipitation protocol for rod-like TiO2-ZnO NPs of different TiO2:ZnO molar ratios for solar energy harvesting using N3 dye. The synthesized nanocomposites were evidenced with various analytical probing techniques. X-ray diffraction scrutiny corroborated rutile and hexagonal wurtzite crystal structure for TiO2 and ZnO respectively. Surface morphology depicted nanorod texture with varying diameters and widths whereas elemental analysis studies confirmed optimal stoichiometry for the presence of Ti, O, and Zn, respectively. The optical energy gap was evaluated using UV-visible spectroscopy was between 2.95 to 3.00 eV. A 2D electron diffraction pattern was captured with the SAED technique to reveal nanocrystalline TiO2-ZnO nanocomposite. Among the samples synthesized, composite having TiO2:ZnO having 3:1 ratio showcased good performance in solar energy conversion registering Jsc = 3.25 mA/cm2, Voc = 946.96 mV, FF of 48% with PEC of 7.38% in an unadulterated aqueous 0.1 M I⁻/ I3⁻ electrolyte under 100 mW/cm2 irradiation while EIS investigation resulted in Rs = 3.17 cm2, Rct = 20.14 cm2, Cdl (10-9) = 40.25 F/cm2 and Zw (10-5) = 3.27 mMho.Keywords
All Related Versions
This publication has 32 references indexed in Scilit:
- Fabrication of TiO2-ZnO nanocomposite photoanodes to enhance the dye-sensitized solar cell efficiencyResearch on Chemical Intermediates, 2022
- Achievement of superior efficiency of TiO2 nanorod-nanoparticle composite photoanode in dye sensitized solar cellJournal of Alloys and Compounds, 2020
- Facile Synthesis of Nano-Diced SnO2–ZnO Composite by Chemical Route for Gas Sensor ApplicationJournal of Electronic Materials, 2019
- Electrochemical water oxidation on WO3 surfaces: A density functional theory studyCatalysis Today, 2019
- WO3 nanoflower coated with graphene nanosheet: Synergetic energy storage composite electrode for supercapacitor applicationJournal of Alloys and Compounds, 2017
- A glucose biosensor based on TiO2–Graphene compositeBiosensors and Bioelectronics, 2012
- Eosin-Y and N3-Dye sensitized solar cells (DSSCs) based on novel nanocoral TiO2: A comparative studyElectrochimica Acta, 2012
- Preparation of coaxial TiO2/ZnO nanotube arrays for high-efficiency photo-energy conversion applicationsElectrochemistry Communications, 2011
- Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and ZnApplied Surface Science, 2010
- New entries in the XPS fingerprint database for the characterization of precipitated Cu-Zn-Al oxide catalystsSurface and Interface Analysis, 1992