Performance Analysis of a Low-Power High-Speed Hybrid 1-bit Full Adder Circuit
Authors:
Top Cited Papers
- 29 September 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 23 (10) , 2001-2008
Abstract
In this paper, a hybrid 1-bit full adder design employing both complementary metal-oxide-semiconductor (CMOS) logic and transmission gate logic is reported. The design was first implemented for 1 bit and then extended for 32 bit also. The circuit was implemented using Cadence Virtuoso tools in 180-and 90-nm technology. Performance parameters such as power, delay, and layout area were compared with the existing designs such as complementary pass-transistor logic, transmission gate adder, transmission function adder, hybrid pass-logic with static CMOS output drive full adder, and so on. For 1.8-V supply at 180-nm technology, the average power consumption (4.1563 μW) was found to be extremely low with moderately low delay (224 ps) resulting from the deliberate incorporation of very weak CMOS inverters coupled with strong transmission gates. Corresponding values of the same were 1.17664 μW and 91.3 ps at 90-nm technology operating at 1.2-V supply voltage. The design was further extended for implementing 32-bit full adder also, and was found to be working efficiently with only 5.578-ns (2.45-ns) delay and 112.79-μW (53.36-μW) power at 180-nm (90-nm) technology for 1.8-V (1.2-V) supply voltage. In comparison with the existing full adder designs, the present implementation was found to offer significant improvement in terms of power and speed.Keywords
This publication has 20 references indexed in Scilit:
- Design analysis of XOR (4T) based low voltage CMOS full adder circuit2011
- Design of new full adder cell using hybrid-CMOS logic style2011
- Architecture of adders based on speed, area and power dissipation2011
- CMOS Full-Adders for Energy-Efficient Arithmetic ApplicationsIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2010
- A novel low-power full-adder cell for low voltageIntegration, 2009
- ULPFA: A New Efficient Design of a Power-Aware Full AdderIEEE Transactions on Circuits and Systems I: Regular Papers, 2008
- Novel design methodology for high-performance XOR-XNOR circuit design2004
- A 14-transistor CMOS full adder with full voltage-swing nodes2003
- Low-power logic styles: CMOS versus pass-transistor logicIEEE Journal of Solid-State Circuits, 1997
- New efficient designs for XOR and XNOR functions on the transistor levelIEEE Journal of Solid-State Circuits, 1994