Comparison of tribological and corrosion characteristics of AISI 316Ti and AISI 430 stainless steels
Open Access
- 21 November 2024
- journal article
- research article
- Published by Stowarzyszenie Menedzerow Jakosci i Produkcji in Production Engineering Archives
- Vol. 30 (4) , 565-576
Abstract
This study presents an investigation into the tribological, corrosion, and tribocorrosion properties of AISI 316Ti (austenitic) and AISI 430 (ferritic) stainless steels. The comparative analysis focuses on microstructural characterization, hardness, and a series of tribological, electrochemical, and tribocorrosion tests conducted in 0.9% NaCl using a specialized linear tribometer to reveal the quality of the studied materials in tribocorrosion applications. Friction tests were performed under both dry and corrosive conditions, while tribocorrosion tests were conducted under open circuit potential (OCP) conditions in 0.9% NaCl, with the electrode potential of the test specimen monitored during friction. To evaluate the electrochemical behavior of the materials, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) were conducted using a 0.9% NaCl solution. The measured corrosion potential (Ecorr) suggests that AISI 430 is thermodynamically more stable than AISI 316Ti; however, AISI 316Ti demonstrated higher polarization resistance (RP) values compared to AISI 430. The findings indicate that material qualities significantly influence the coefficient of friction (CoF). Additionally, a notable antifriction effect of 0.9% NaCl was observed during tribological testing, resulting in a lower CoF compared to dry friction conditions. A cathodic shift in OCP during tribocorrosion testing was also observed in both materials, indicating an increase in corrosion vulnerability when the passive layer is degraded.Keywords
This publication has 34 references indexed in Scilit:
- Corrosive-Wear Performance of Grade 316 Stainless Steel Sliding Against Grade 316 Stainless Steel in NaCl SolutionJournal of Materials Engineering and Performance, 2023
- Tribocorrosion Behavior of 2205 Duplex Stainless Steel in Sodium Chloride and Sodium Sulfate EnvironmentsTribology Letters, 2022
- Tribocorrosion performance of 316L stainless steel enhanced by laser clad 2-layer coating using Fe-based amorphous powderJournal of Materials Research and Technology, 2022
- Effect of sliding wear and electrochemical potential on tribocorrosion behaviour of AISI 316 stainless steel in seawaterEngineering Science and Technology, an International Journal, 2021
- Tribocorrosion Behavior and Degradation Mechanism of 316L Stainless Steel in Typical Corrosive MediaActa Metallurgica Sinica (English Letters), 2021
- Influence of Molybdenum on Tribo-Corrosion Behavior of 316L Stainless Steel in Artificial SalivaJournal of Bio- and Tribo-Corrosion, 2015
- Tribocorrosion behaviour of AISI 304 stainless steel in 0.5M NaCl solutionMaterials Chemistry and Physics, 2011
- Evaluation of friction coefficient using indentation model of Brinell hardness test for sheet metal formingJournal of Mechanical Science and Technology, 2011
- Assessment of the surface state behaviour of Al71Cu10Fe9Cr10 and Al3Mg2 complex metallic alloys in sliding contactsIntermetallics, 2009
- Open circuit potentials of metallic chromium and austenitic 304 stainless steel in aqueous sulphuric acid solution and the influence of chloride ions on themCorrosion Science, 2008