Valeric acid extraction with tri‐n‐butyl phosphate impregnated in a macroporous resin: II. Studies in fixed bed columns
- 24 October 2005
- journal article
- research article
- Published by Wiley in Journal of Chemical Technology & Biotechnology
- Vol. 81 (3) , 275-281
Abstract
Extraction and back‐extraction of valeric acid in a fixed bed packed with Amberlite XAD‐4 resin impregnated with tri‐n‐butyl phosphate were experimentally studied at 25 °C. The effects of the feed flow rate, acid concentration in the feed solution and extractant concentration in the impregnated resin on the breakthrough curves, were investigated. The bed saturation capacity was larger under the conditions of higher extractant concentration in the resin phase and higher acid concentration in the feed solution. A dynamic model that considers intraparticle diffusion and external liquid film diffusion as limiting steps in mass transfer rates was successfully applied. The intraparticle effective diffusivities (10−9 dm2 s−1) were from one to three orders of magnitude lower than the diffusivities in the external liquid film (10−8–10−6 dm2 s−1). A fast and complete back‐extraction of valeric acid from the saturated bed was carried out with sodium hydroxide solutions. The operational life of the impregnated resin was also studied. Copyright © 2005 Society of Chemical IndustryKeywords
This publication has 9 references indexed in Scilit:
- Valeric Acid Extraction with Tri‐N‐butyl Phosphate Impregnated in a Macroporous Resin. I. Equilibrium and Mass Transfer RatesSeparation Science and Technology, 2005
- α-Phenylglycine Extraction with a Trialkylmethylammonium Chloride-Impregnated Macroporous ResinChemical Engineering Research and Design, 2002
- α-Phenylglycine Extraction with Trialkylmethylammonium Chloride Free and Immobilized in a Macroporous ResinChemical Engineering Research and Design, 2002
- Synthesised phosphine sulphide-type macroporous polymers for the preconcentration and separation of gold (III) and palladium (II) in a column systemReactive and Functional Polymers, 2001
- Gold recovery with ion exchange used resinsSeparation and Purification Technology, 2001
- Extraction of Cadmium from Phosphoric Acid Using Resins Impregnated with Organophosphorus ExtractantsIndustrial & Engineering Chemistry Research, 2001
- Column Sorption of Citric Acid from Aqueous Solutions Using Tri-n-octylamine-Impregnated Macroporous ResinsSeparation Science and Technology, 1995
- Uptake of phenylalanine and tyrosine by a strong‐acid cation exchangerAIChE Journal, 1989
- General Numerical Solution for Solid Diffusion in Fixed BedsIndustrial & Engineering Chemistry, 1954