Fretting fatigue fracture behavior of Ti6Al4V dovetail joint specimens at 500°C treated with nanosecond stacked femtosecond laser impact strengthening
- 10 September 2024
- journal article
- research article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 47 (12) , 4478-4497
Abstract
The high‐temperature fretting fatigue damage characteristics of dovetail specimens strengthened by nanosecond laser (NL) and nanosecond combined femtosecond laser (F‐NL) were investigated. The results show that the fretting fatigue life of the NL strengthened sample (NL sample) is improved by 211.2% compared to the base metal samples (BM sample). The lifetime of the nanosecond combined femtosecond strengthened sample (F‐NL sample) was increased by 319.6%. It was attributed to the strengthening introducing hardened layers, residual compressive stress field, and high density of dislocations. The combined strengthening process reduces the surface roughness of the NL strengthened surfaces, while the strengthening influence layer is further increased. The fracture morphology shows that the crack source of the strengthened specimen has changed from multi‐source sprouting to single‐source sprouting, and the crack source sprouted on the subsurface. The fatigue strip morphology similarly confirms that a reduction in the crack propagation rate occurs.Keywords
This publication has 53 references indexed in Scilit:
- High-temperature fatigue crack growth characteristics of IN718 Ni-based alloy treated by laser peeningEngineering Fracture Mechanics, 2022
- Femtosecond laser polishing yttria-stabilized zirconia coatings for improving molten salts corrosion resistanceCorrosion Science, 2021
- Corrosion fatigue behavior of Fe-16Mn-0.6C-1.68Al twinning-induced plasticity steel in simulated seawaterCorrosion Science, 2021
- Collaborative crack initiation mechanism of 25CrMo4 alloy steels subjected to foreign object damagesEngineering Fracture Mechanics, 2020
- Gradient plastic strain accommodation and nanotwinning in multi-pass laser shock peened 321 steelApplied Surface Science, 2019
- Relation of hardness with FWHM and residual stress of GCr15 steel after shot peeningApplied Surface Science, 2018
- Effect of laser peening and shot peening on fatigue striations during FCGR study of Ti6Al4VInternational Journal of Fatigue, 2016
- Fatigue performance improvement in AISI 4140 steel by dynamic strain aging and dynamic precipitation during warm laser shock peeningActa Materialia, 2011
- An assessment of the role of near-threshold crack growth in high-cycle-fatigue life prediction of aerospace titanium alloys under turbine engine spectraInternational Journal of Fracture, 1996
- The attenuation of shock waves in nickel: Second reportMaterials Science and Engineering, 1983