The effect of the chemical compositions of palladium alloys on their hydrogen permeability
Open Access
- 12 July 2024
- journal article
- Published by Voronezh State University in Kondensirovannye sredy i mezhfaznye granitsy = Condensed Matter and Interphases
- Vol. 26 (3) , 474-482
Abstract
The purpose of the article is to identify the effect of the alloying element in palladium alloys on their parameters of hydrogen permeability. Cyclic voltammetry and anodic-cathodic chronoamperometry were used to study the electrochemical behavior of coldrolled alloys of Pd-5Pb, Pd-6Ru, and Pd-7Y systems (wt. %) in the processes of atomic hydrogen injection and extraction in a deaerated aqueous solution of 0.1 M H2SO4. The study identified the role of lead, ruthenium, and yttrium in the processes of atomic hydrogen injection and ionization. Voltammetry and chronoamperometry data indicate a higher ionization rate for the Pd-6Ru alloy. The parameters of hydrogen permeability calculated from the cathodic current drops show that the hydrogen permeability of alloys varies in the series: Pd-6Ru > Pd-7Y > Pd-5Pb. The effective constant of the injection rate coincides for all alloys within the measurement error, whereas the effective constant of the extraction rate of atomic hydrogen is higher for Pd–5Pb. The marginal solubility of ruthenium in the Pd-6Ru alloy contributes to the passivation of grain boundaries in the alloy with excess ruthenium. As a result, there is preferential movement of hydrogen solely along the grain body. This results in higher hydrogen permeabilityKeywords
This publication has 21 references indexed in Scilit:
- A state of the art review on biomass processing and conversion technologies to produce hydrogen and its recovery via membrane separationInternational Journal of Hydrogen Energy, 2020
- Hydrogen permeation and stability in ultra-thin Pd Ru supported membranesInternational Journal of Hydrogen Energy, 2020
- Palladium membranes applications in reaction systems for hydrogen separation and purification: A reviewChemical Engineering and Processing - Process Intensification, 2017
- The hydrogen transport through the metal alloy membranes with a spatial variation of the alloy composition: Potential diffusion and enhanced permeationInternational Journal of Hydrogen Energy, 2017
- Separation performance of foils from Pd—In(6%)—Ru(0.5%), Pd—Ru(6%), and Pd—Ru(10%) alloys and influence of CO2, CH4, and water vapor on the H2 flow rate through the test membranesRussian Chemical Bulletin, 2016
- Diffusion of H through Pd–Y alloy membranesJournal of Membrane Science, 2016
- Hydrogen electrosorption into Pd-rich Pd–Ru alloysJournal of Electroanalytical Chemistry, 2013
- Novel non-alloy Ru/Pd composite membrane fabricated by electroless plating for hydrogen separationInternational Journal of Hydrogen Energy, 2011
- Palladium–ruthenium membranes for hydrogen separation fabricated by electroless co-depositionInternational Journal of Hydrogen Energy, 2009
- The influence of order on hydrogen diffusion in the solid solution alloys Pd-5.75at.%Ce and Pd-8at.%YJournal of the Less Common Metals, 1980