WASPAS Based Multi Response Optimization in Hard Turning of AISI 52100 Steel under ZnO Nanofluid Assisted Dual Nozzle Pulse-MQL Environment
Open Access
- 6 September 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (18) , 10062
Abstract
Hard turning is an emerging machining technology that evolved as a substitute for grinding in the production of precision parts from hardened steel. It offers advantages such as reduced cycle times, lower costs, and environmental benefits over grinding. Hard turning is stated to be difficult because of the high hardness of the workpiece material, which causes higher tool wear, cutting temperature, surface roughness, and cutting force. In this work, a dual-nozzle minimum quantity lubrication (MQL) system’s performance assessment of ZnO nano-cutting fluid in the hard turning of AISI 52100 bearing steel is examined. The objective is to evaluate the ZnO nano-cutting fluid’s impacts on flank wear, surface roughness, cutting temperature, cutting power consumption, and cutting noise. The tool flank wear was traced to be very low (0.027 mm to 0.095 mm) as per the hard turning concern. Additionally, the data acquired are statistically analyzed using main effects plots, interaction plots, and analysis of variance (ANOVA). Moreover, a novel Weighted Aggregated Sum Product Assessment (WASPAS) optimization tool was implemented to select the optimal combination of input parameters. The following optimal input variables were found: depth of cut = 0.3 mm, feed = 0.05 mm/rev, cutting speed = 210 m/min, and flow rate = 50 mL/hr.Keywords
This publication has 38 references indexed in Scilit:
- Multi objective optimization using different methods of assigning weights to energy consumption responses, surface roughness and material removal rate during rough turning operationJournal of Cleaner Production, 2017
- 1.3 Finish Machining of Hardened Steel2017
- Optimization of energy consumption response parameters for turning operation using Taguchi methodJournal of Cleaner Production, 2016
- Machining parameters effect in dry turning of AISI 316L stainless steel using coated carbide toolsProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2015
- Machining of hardened steel—Experimental investigations, performance modeling and cooling techniques: A reviewInternational Journal of Machine Tools and Manufacture, 2015
- Effect of Tool Geometry in Turning AISI 1045 Steel: Experimental Investigation and FEM AnalysisArabian Journal for Science and Engineering, 2014
- Nano-Cutting Fluid for Enhancement of Metal Cutting PerformanceMaterials and Manufacturing Processes, 2012
- Machining of Hard Materials2011
- Sustainable machining: selection of optimum turning conditions based on minimum energy considerationsJournal of Cleaner Production, 2010
- Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN toolInternational Journal of Refractory Metals and Hard Materials, 2010