DEM Investigation of the Influence of Minerals on Crack Patterns and Mechanical Properties of Red Mudstone
Open Access
Abstract
Rocks are natural heterogeneous materials. It is common for a rock to have several kinds of minerals, which will have a significant effect on its mechanical behavior. The purpose of the numerical simulation study in this paper is to explore the effects of minerals on the crack patterns and mechanical properties of rocks. First, the corresponding calculation model is established by using the discrete element method (DEM), whereby the mechanical parameters of the blocks and joints in the Tyson polygon procedure are fitted with the rock properties obtained in the laboratory. Then, various combination models of different mineral sizes and ratios are established to study the effects of mineral size, position, and ratio on the fracture distribution and mechanical properties of rock samples. The results indicate that with increased circle size of the center mineral and the mineral ratio, the elastic modulus and uniaxial compression strength (UCS) of the model gradually increase. The drop degree of post-peak stress decreases, and the integrity and bearing capacity increase. It is found that there is a quartic polynomial relationship between elastic modulus and mineral circle radius, with R2 ≥ 0.94. The minerals located in the crack propagation path will effectively block the crack and change the propagation direction. When the mineral position is close to the model boundaries, especially the lateral boundaries, it has a significant influence on the crack initiation position, causing crack initiation to occur at the upper boundary of the mineral circle and propagate to the middle of the model. With increased mineral percentage and small-size mineral circle proportion, the depth of extension of the crack from boundary to center is reduced, the crack has wide development in the boundary area, the number of central cracks in the rock specimen decreases, and the degree of fragmentation decreases.Keywords
Funding Information
- National Key Research and Development Program of China (2015CB251600)
- the Qing Lan Project (Grant Sujiaoshi (2016)15)
- the Jiangsu basic research program (Natural Science Foundation, BK20150051)
- National Natural Science Foundation of China (51874278)
- the Fundamental Research Funds for the Central Universities of China (Grant No.2017XKQY022)
This publication has 28 references indexed in Scilit:
- A Discrete Element Model for Predicting Shear Strength and Degradation of Rock Joint by Using Compressive and Tensile Test DataRock Mechanics and Rock Engineering, 2011
- Micromechanical parameters in bonded particle method for modelling of brittle material failureInternational Journal for Numerical and Analytical Methods in Geomechanics, 2010
- Evidence for a Long-Term Strength Threshold in Crystalline RockRock Mechanics and Rock Engineering, 2010
- Relative brittleness characterization of some selected granitic building stones: Influence of mineral grain sizeConstruction and Building Materials, 2009
- Mechanical degradation of emplacement drifts at Yucca Mountain—A modeling case study—Part I: Nonlithophysal rockInternational Journal of Rock Mechanics and Mining Sciences, 2007
- Digital image-based numerical modeling method for prediction of inhomogeneous rock failureInternational Journal of Rock Mechanics and Mining Sciences, 2004
- Numerical methods in rock mechanicsInternational Journal of Rock Mechanics and Mining Sciences, 2002
- Numerical studies of the influence of microstructure on rock failure in uniaxial compression — Part I: effect of heterogeneityInternational Journal of Rock Mechanics and Mining Sciences, 2000
- Effects of Grain Size on the Initiation and Propagation Thresholds of Stress-induced Brittle FracturesRock Mechanics and Rock Engineering, 1999
- Observations of brittle failure around a circular test tunnelInternational Journal of Rock Mechanics and Mining Sciences, 1997