Programming Multistage Shape Memory and Variable Recovery Force with 4D Printing Parameters
- 24 September 2019
- journal article
- research article
- Published by Wiley in Advanced Materials Technologies
- Vol. 4 (11)
Abstract
Multistage shape changing is essential for soft robots and actuators, which is difficult to achieve via current 4D printing methods. While 4D printing smart materials and structures are widely investigated, the effect of 3D printing parameters on 4D behaviors, on the other hand, is not adequately explored thus far. Here, it is proposed to program multistage shape memory and variable recovery force by designing 4D printing parameters. Specifically, the effects of nozzle temperature, layer thickness, geometric thickness, and filling angle on shape memory properties of polylactic acid are investigated. It is found that the nozzle temperature apparently affects shape recovery time, and the filling angle apparently affects shape recovery force. Further, the geometric thickness of specimens simultaneously affects recovery time and force. Based on the relationship between shape memory properties and process parameters, the programming of shape recovery speed and recovery force is achieved successfully. As a proof‐of‐concept, an order of the shape recovery of artificial fingers and a lifting box that can use shape recovery force to lift different weights are demonstrated. This strategy fully takes the advantages of 4D printing technology and enriches the approach to the control of 4D printing actuators and soft robots.Keywords
This publication has 27 references indexed in Scilit:
- Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK materialJournal of Materials Processing Technology, 2017
- Programming 2D/3D shape-shifting with hobbyist 3D printersMaterials Horizons, 2017
- Direct 4D printing via active composite materialsScience Advances, 2017
- Ultrafast Digital Printing toward 4D Shape Changing MaterialsAdvanced Materials, 2016
- Self‐Healing HydrogelsAdvanced Materials, 2016
- 4D Printing of Reversible Shape Morphing Hydrogel StructuresMacromolecular Materials and Engineering, 2016
- Current status of 4D printing technology and the potential of light-reactive smart materials as 4D printable materialsVirtual and Physical Prototyping, 2016
- Sequential Self-Folding Structures by 3D Printed Digital Shape Memory PolymersScientific Reports, 2015
- Oppositely Charged Polyelectrolytes Form Tough, Self‐Healing, and Rebuildable HydrogelsAdvanced Materials, 2015
- Biodegradation and biocompatibility of PLA and PLGA microspheresAdvanced Drug Delivery Reviews, 2012