Influence of surrounding wall thickness on the fatigue resistance of molars restored with ceramic inlay.
Authors:
Open Access
- 11 June 2014
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Brazilian Oral Research
- Vol. 28 (1) , 1-8
Abstract
The purpose of this study was to evaluate the influence of buccal and lingual wall thickness on the fatigue resistance of molars restored with CAD/CAM ceramic inlays. Forty human third molars were selected and divided into 4 groups, according to the remaining surrounding wall thickness chosen for inlay preparation (n = 10): G1, 2.0 mm; G2, 1.5 mm; G3, 1.0 mm; G4, 0.5 mm. All inlays were made from feldspathic ceramic blocks by a CAD/CAM system, and cemented adhesively. After 1 week stored in distilled water at 37 °C, the specimens were subjected to fatigue testing under the following protocol: 5Hz; pre-load of 200 N for 5,000 cycles, followed by increasing loads of 400, 600, 800, 1000, 1200 and 1400 N for 30,000 cycles each. The specimens were cycled until failure or completion of 185,000 cycles. The survival rate of the groups was compared using the Kaplan-Meier survival curves (p > 0.05). All specimens withstood the fatigue protocol (185,000 cycles), representing a 100% survival rate. The Kaplan-Meier survival curves showed no difference between groups. It can be concluded that the remaining tooth wall thickness did not influence the fatigue resistance of molars restored with CAD/CAM ceramic inlays.Keywords
This publication has 19 references indexed in Scilit:
- Chairside vs. labside ceramic inlays: Effect of temporary restoration and adhesive luting on enamel cracks and marginal integrityDental Materials, 2011
- Time-Frequency Analysis of Chewing Activity in the Natural EnvironmentJournal of Dental Research, 2011
- Novel-design ultra-thin CAD/CAM composite resin and ceramic occlusal veneers for the treatment of severe dental erosionThe Journal of Prosthetic Dentistry, 2011
- Ceramic Inlays: A Case Presentation and Lessons Learned from the LiteratureJournal of Esthetic and Restorative Dentistry, 2009
- Influence of different cusp coverage methods for the extension of ceramic inlays on marginal integrity and enamel crack formation in vitroClinical Oral Investigations, 2009
- Long-term Survival of Cerec Restorations: A 10-year StudyOperative Dentistry, 2008
- Which mechanical and physical testing methods are relevant for predicting the clinical performance of ceramic‐based dental prostheses?Clinical Oral Implants Research, 2007
- Ceramic inlays bonded with two adhesives after 4 yearsDental Materials, 2006
- Recent Advances in Ceramics for DentistryCritical Reviews in Oral Biology & Medicine, 1996
- An artificial oral environment for testing dental materialsIEEE Transactions on Biomedical Engineering, 1991